Chrysler Pacifica Collision Avoidance Problems

Collision Avoidance complaints by model year

Which parts fail

• Warnings
  48
• Automatic emergency braking
  40
• Adaptive cruise control
  34
• Blind spot detection
  16
• Rearview system braking
  15
• Assist
  6
• Sensing system › Camera
  5
• Warning
  3

Components named in complaints (automatic emergency braking, adaptive cruise, lane keeping, backup camera).

Mileage when the problem started

• Under 25k
  2153%
• 25k–50k
  410%
• 50k–75k
  718%
• 75k–100k
  410%
• 100k–150k
  410%
• 150k+
  00%

What owners report

We were at a complete stop waiting for traffic to go, I had my foot on the brake pedal and the car lunge/revved up and hit the car in front of me. This is the 3rd time this has happened. The first time we were advised it was probably the front-end sensor that were probably covered with ice. We were advised they are very sensitive. The 2nd time it was winter still, so we took the car through the car wash to make sure no ice was built up. We did not get in an accident because traffic started to move. We took the vehicle to the dealership, and they could not find anything wrong with it. Chrysler Corp got involved and they sent a 3rd party to check the van and black box. They advised nothing was found on the black box (not even an accident) and their investigators found nothing wrong with the vehicle. No warning messages were reported after the crash. …

1215 miles . The adaptive cruise control system was acting sketchy. It failed to maintain proper distance and speed between the vehicle in front. We took it into the dealer who said that the sensor had failed on this brand new vehicle and they replaced it on 2/12/2025. After driving the vehicle when we got it back. There does not seem to be much different. The van tends to accelerate extremely quickly only to get behind the vehicle in front sometimes not keeping proper distance with the way it's set, as well as waiting to the last possible moment maybe 2 or 3 car lengths to break which is extremely scary. Sometimes the warning comes up that says break break . Even with the system said it maximum a car cutting in the system is extremely slow to react. This has led to numerous close calls of rear end collision. …

The contact owns a 2024 Chrysler Pacifica. The contact stated while driving approximately 55 MPH, the braking system erroneously activated causing the vehicle to abruptly stop. The failure had occurred on several occasions while driving on the same highway. The contact stated that during the failure, the Forward Collision Avoidance: Adaptive Cruise Control was not activated. The vehicle was taken to the local dealer who was able to duplicate the failure, but the cause of the failure was not yet determined. The manufacturer was notified of the failure. The contact stated that the vehicle had been modified to accommodate a disabled driver and did not believe that the failure was related to the modification. The failure mileage was approximately 800.

CRASH INFO - 12:50 am, 2024. 2024 Chrysler Pacifica Touring L Components failed: Airbags non-deployed; Steering Control Module; TCS System; Fwd Collision Avoidance & Lane Departure; + Not avail to inspect. Car sold at auction. Obtained Black Box & OBD info. Car owned by EAN Holdings, LLC. - Enterprise RAC. Problem not reproduced, car not drivable after crash. Did not notice any warning lamps, too busy trying to keep car on road. My wife was heading home after some late-night shopping when crash occurred on 2-lane dry & clean asphalt country road. Weather was a cool and clear moonlit night. Posted speed limit 45mph. With her headlights on she could see very well far up ahead & knew her surroundings, where the roadside became grass on the left, & a drainage ditch to the right side. …

The contact owns a 2023 BraunAbility Chrysler Pacifica. The contact stated that while driving at various speeds and using the power chair with hand controls, the drivability was terrible. While driving at various speeds, it was difficult to stay in the intended lane. The Lane Sensing feature was loose and failed to the vehicle failed to steer correctly. While driving at various speeds, the steering wheel was stiff. While making turns, the vehicle rocked. The driver turned the feature off. The contact stated that there was a 3- or 4-inch clearance between the underbody that was lowered once the driver and power chair occupied the vehicle, which continuously scraped the roadway. There was an abnormal rumbling noise detected from the vehicle. The ramp failed to unfold flat when exiting the vehicle. While using the ramp to enter the vehicle, the ramp was difficult to unfold. …

The contact owns a 2023 Chrysler Pacifica. The contact received notification of NHTSA Campaign Number: 24V436000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that the back-over prevention camera displayed still images, with blackouts, or was inoperable. The failure had become more persistent and then became a constant failure. The contact had to restart the vehicle to regain functionality or correct the malfunction. While turning off and restarting the vehicle, the radio was randomly activated without driver input. The contact believed that the failure had caused additional failures with other control panel functions such as the radio, heating, and the A/C system failing to activate as needed. …

The contact owns a 2022 Chrysler Pacifica. The contact stated that while driving at 80 MPH with the cruise control activated, the vehicle experienced phantom braking. The following day, while driving at an undisclosed speed, the vehicle was vibrating and the brakes failed to immediately stop the vehicle. The contact stated that the brakes caught fire, and there were flames coming from the brake calipers. The contact was able to put out the fire with a hose. The vehicle was towed to the dealer, where it remained for twenty-one days; however, no cause of failure was found. The failure recurred, and the vehicle was taken to an independent mechanic, who recommended the contact stop driving the vehicle as it was unsafe on the roadway. The vehicle was not repaired. …

Traveling down a country road on a clear afternoon, the vehicle traveled approximately 35 mph while cresting a small hill. On the other side of the hill was a "T" shaped intersection where another vehicle stopped in the intersection from a stop sign several feet behind. The other driver failed to complete the turn when they saw oncoming traffic. The driver noticed the intersection had an obstructed path and attempted to move into the oncoming traffic lane since no oncoming traffic was visible. Just then, the onboard computer installed in the control panel of the drivers seat had acted upon either the obstruction or the switch in lanes and assumed complete control of the braking and steering systems. The driver was unable to retrieve control from the computer systems artificial intelligence before a direct crash occured with a telephone pole. …

Related recalls (5)