2016 Jeep Wrangler Brake Problems

Which parts fail

• Antilock › ABS warning light
  4
• Antilock/traction control/electronic limited slip › ABS warning light
  2
• Foundation components › Hoses, lines/piping, and fittings
  1

Components named in complaints (service brakes, ABS, rotors and pads, parking brake).

Mileage when the problem started

• Under 25k
  921%
• 25k–50k
  1023%
• 50k–75k
  1126%
• 75k–100k
  819%
• 100k–150k
  49%
• 150k+
  12%

Owner reports

Selected complaints filed with NHTSA by 2016 Jeep Wrangler owners, lightly cleaned up (personal details are redacted by NHTSA).

The contact owns a 2016 Jeep Wrangler. The contact stated while driving 40 MPH, the brakes failed to operate as intended. There was no warning light illuminated. The vehicle was driven to a stop and the contact smelled rubber burning with a little bit of smoke. The vehicle was driven to an independent mechanic and was repaired. The failure recurred and the vehicle was taken back to the independent mechanic. The contact was informed that the ABS module was sticking and needed to be replaced however, parts were on back order. The manufacture was not notified of the failure. The failure mileage was 60,000.

The contact owns a 2016 Jeep Wrangler. The contact stated that while driving at an undisclosed speed, the vehicle jerked with an abnormal sound coming from the vehicle. The contact stopped the vehicle, and there was an unknown warning light illuminated. The vehicle was turned off and restarted; however, while driving, the failure reoccurred with several unknown warning lights illuminated. The vehicle was towed to a private dealer, where it was diagnosed with ABS control module failure. The dealer informed the contact that the part to do the repair was not available. The vehicle remained with the dealer unrepaired. The contact related the failure to NHTS Campaign number: 22V426000 (SERVICE BRAKES, HYDRAULIC); however, the VIN was not included. The manufacturer was made aware of the failure. The failure mileage was approximately 77,000.

The contact owns a 2016 Jeep Wrangler. The contact stated that while driving on wet roads, the vehicle lost traction, failed to accelerate as intended, and caused the tires to spin before accelerating. While depressing the brake pedal, the wheels locked up, and the vehicle failed to come to a gradual stop. The ABS control module displayed DTC: C2200 (Internal ABS Module Failure). The vehicle was taken to the dealer, who confirmed the fault code. The vehicle was not repaired because the Part Number 68259556AD was on back order. The manufacturer was notified of the failure and informed the contact that the part was still under engineering review, and that a remedy had not yet been found. The failure mileage was approximately 150,000.

Pulled into parking space. Applied brakes and came to a complete stop. Could hear engine revving up.. Thought ok, that gas pedal seem to be pressed. Look at my foot wasn't pressing the pedal. Looked at floor mats. It was laying flat on floor, not manipulating the pedal. I thought what's happening? And lifted foot off brake ever so slightly and car jumped 6 inch high curb and hit the building.. Pretty hard. Caused structural damage to the wall. I went to the hospital, driven by husband. Swelling of my right leg on the shin. Released and told to stay off leg for few days, no fractures.After doing research, It seems other jeep riders have had this experience. I have no idea how fast the jeep was going.

The contact owns a 2016 Jeep Wrangler. The contact stated that the ABS, traction control, and service brake warning lights were illuminated. The ABS and cruise control were inoperable. The traction control was inoperable while driving in the mountains and in snow. The local dealer was contacted, who informed the contact that the parts were on backorder to repair the vehicle. The vehicle was not diagnosed or repaired. The contact called another local dealer, AJ Dohmann Chrysler Dodge Jeep Ram (24945 LA-1 S, Plaquemine, LA 70764), who confirmed that the parts were on backorder. The manufacturer was contacted, but no assistance was provided. The failure mileage was approximately 60,000.

The contact owns a 2016 Jeep Wrangler. The contact stated that while driving at an undisclosed speed, the vehicle experienced an ABS module failure. The ABS and traction control warning lights were illuminated. The dealer was contacted and diagnosed the vehicle with ABS control module failure; however, the part to repair the vehicle was not available. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time to provide the parts for the repair. The manufacturer was made aware of the failure but was unable to determine when parts for the repair would be available. The failure mileage was approximately 80,000.

The contact owns a 2016 Jeep Wrangler. The contact stated while the vehicle was parked, the antilock brake system warning light was illuminated. The vehicle was taken to an independent mechanic where it was diagnosed that the antilock brake system needed to replaced however, the dealer recommended that the vehicle be taken to a dealer. The vehicle was not repaired. The vehicle was taken to a dealer where it was diagnosed once again that the antilock brake system needed to be replaced however, the parts were not available. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 76,000.

The contact owns a 2016 Jeep Wrangler. The contact stated that while driving at various speeds, the traction control, Brake, and ABS warning lights illuminated. In addition, the contact stated that the Hill Assist warning light was occasionally illuminated. The contact inspected the vehicle and became aware that the speed sensor and battery needed to be replaced. The vehicle was repaired by the contact; however, the failure persisted. The local dealer was contacted; however, the contact was informed that the VIN was not under recall. The manufacturer was made aware of the failure. The failure mileage was approximately 60,700.

The contact owns a 2016 Jeep Wrangler. The contact stated while driving at an undisclosed speed, the ABS and traction control warning lights illuminated. The vehicle was taken to an independent mechanic where it was diagnosed with a failed ABS module. The contact was informed that the ABS module needed to be replaced. The vehicle was not repaired. In addition, the contact was informed that the parts were in back order indefinitely. The contact was advised that she could drive the vehicle at her own risk. The manufacturer was not made aware of the failure. The failure mileage was approximately 67,108.

The contact owns a 2016 Jeep Wrangler. The contact stated while driving at various speeds, the ABS was erroneously activated, causing the vehicle to abruptly decelerate, and the brake pads and brake rotors overheated. During the failure, the ABS and Traction Control warning lights were illuminated. The vehicle was taken to the local dealer who diagnosed that the ABS Control Module was faulty and needed to be replaced, but the part was on backorder and not available. The vehicle was not yet repaired. The manufacturer was notified of the failure. The failure mileage was 120,000.

Brake complaints in other Wrangler years