Which parts fail
Components named in complaints (service brakes, ABS, rotors and pads, parking brake).
Mileage when the problem started
Owner reports
Selected complaints filed with NHTSA by 2013 Jeep Wrangler owners, lightly cleaned up (personal details are redacted by NHTSA).
The contact owns a 2013 Jeep Wrangler. The contact stated that the ABS warning light was illuminated, and a message indicating that the brake light bulb had failed was displayed even though the bulb was operable. The vehicle was taken to an independent mechanic, where it was diagnosed, and determined that the ABS module had failed and needed to be replaced; however, the part was not available. The contact stated that the mechanic contacted several dealers and was informed that the part was on backorder or had been discontinued. A local dealer also informed the contact that an ETA for the part could be provided, but the part would not be available on the expected date based on past experience. The manufacturer was notified of the failure, but no assistance was provided. The failure mileage was approximately 95,000.
The contact owns a 2013 Jeep Wrangler. The contact stated that the vehicle was running rough. Additionally, while the brake pedal was depressed, the vehicle was slow to respond. There were no warning lights illuminated. The vehicle was taken to an independent mechanic who informed the contact that the caliper had seized, and that the ball joint and K-bar needed to be replaced. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure but no additional assistance was provided. The failure mileage was approximately 20,000.
While I was attempting to park my jeep across the street from my grandson's school to pick him up at 3:18, as I proceeded to pull in front of the apron so I could backup to a parking spot. In the process of going forward before I got a chance to put the jeep in reverse my brakes failed, hitting a parked car in front of me. I had my jeep towed to Old Center Island Auto Service. The mechanic removed a defective power brake booster and replaced it with a new one.
2013 Jeep Wrangler. ABS module internal failure code C2200. 3 lights are constantly lit on the dashboard. No ABS on this Jeep, making it unsafe in the rain and snow. No way to have this part repaired anymore, nor does the dealership offer it. Shameful and shocking that MOPAR isn't dealing with this problem. Many, many Jeep owners are dealing with this problem. When will we see a recall??
The ABS module failed in summer 2025. We took the Jeep to the mechanic who was unable to source a new part. The part has been on backorder now for over a year. We cannot get the Jeep inspected because of the break safety issue. The Jeep has no ABS if emergency breaking. Several warning lights are constantly on when operating the Jeep.
I just left my house and drove 2 miles at 25mph. My brakes went out then my vehicle caught fire with me and my two children inside. It is being inspected by insurance but there were no warning signs besides my brakes going out.
I have $80,000 in my jeep parked in my garage because the ABS module failed. Error code C2200. I have taken it to three Mechanics; Kap Motor Sports in Palmetto Fl, AFNY, and 4 Wheel Parts in Bradenton Fl. All have run tests coming back with the same error. We have done two Abs bleeds to try and fix the problem. This part should have been recalled years ago. It has been on back order for years and when Firkins Jeep in Bradenton Fl tried to order the part the order was canceled by Jeep. Jeep hasn't recalled it and isn't making it available for their customers who have spent so much money on their jeeps. At this point a lawsuit needs to be filed and have started that process. This is my daily driver and if my Jeep kills or injures someone due to this ABS failure Jeep will be held responsible.
My dash lights went crazy while driving. I couldn't get the vehicle into the correct gear ( automatic transmission) I shut off waited then restarted drove home. After having the codes scaned it shows C2200 code ( faulty brake ABS module) called dealer they had none to sell or buy and told me no time was given to them when or if it would be available. I asked them what's the solution to using my vehicle safely then Park it and don't drive it.. Since then I've found thousands of people just like my situation. How can you build a vehicle and be unable to supply the public with replacement parts to operate as intended and not have a recall or offer a solution to trade off said vehicle. It's definitely a safety issue when a100,000 + owners have the exact same issue and no help In sight.
Wednesday may 11th approximately 5pm. Was sunny and dry. Turned out of mcdonalds driveway. All of a sudden my brake pedal went to the floor. There was very slight pressure just before it bottomed out. I was lucky no one was in front of me. I could not stop. No dash lights came on. I coasted to stop at gas station. While I waited for a tow truck I started car to move into a better spot. Using parking brake. I then just started pumping brakes. And all of a sudden pressure came back and brakes worked as normal. I immediately towed jeep to dealership. They could not recreate the issue. Everything works fine.
The ABS module that controls the antilock braking system is defective for mine and many other Jeeps from 2013-2017. Jeep is no longer manufacturing this part, and essentially this renders the vehicle undriveable. I have sought modules both locally and online, and the experts are telling me that Jeep has not made this part in years. When driving with the bad ABS module while trying to search for the new part, my Jeep shut down on the highway twice, and I was forced to pull over the side of the road. This was extremely dangerous. And Jeep is providing no solutions for owners.
Brake complaints in other Wrangler years
Frequently asked questions
How common are brake problems on the 2013 Jeep Wrangler?
NHTSA has 64 complaints about the brakes of the 2013 Jeep Wrangler, 10% of the model year's 654 complaints. The component named most often is disc › caliper (1 mentions).
Is there a recall for 2013 Jeep Wrangler brake problems?
No. NHTSA lists no brakes recall for the 2013 Jeep Wrangler, though it has 6 recalls for other components. If the problem is widespread, a repair may still be covered by an extended warranty or a manufacturer service bulletin — ask a dealer.
At what mileage do 2013 Jeep Wrangler brake problems start?
Half of the complaints with a recorded mileage happened before about 35,000 miles, and 41% before 25,000 miles.
Is it dangerous?
Owners linked 4 crashes, 2 fires and 1 injury to brakes problems on this model year. If you notice symptoms, have the car checked before driving further.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) — owner complaints through October 20, 2026, recalls and defect investigations; fuel economy from the EPA. Complaints are unverified reports and are not proof of a defect. How we rate model years.