Which parts fail
Components named in complaints (automatic emergency braking, adaptive cruise, lane keeping, backup camera).
Mileage when the problem started
Owner reports
Selected complaints filed with NHTSA by 2018 Ford Explorer owners, lightly cleaned up (personal details are redacted by NHTSA).
The contact owns a 2018 Ford Explorer. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that the A-pillar trim was beginning to detach from the windshield, allowing outside air to enter the vehicle. While in reverse, the back over prevention camera displayed a distorted image, or a solid blue screen without an image. The failure occurred several times while shifting into reverse. The dealer was contacted and confirmed that the part was not available yet available for the recall. The VIN was not under recall for the back-over prevention camera. The manufacturer was not made aware of the failure. The failure mileage was 78,896.
The contact owns a 2018 Ford Explorer. The contact stated that while reversing, the back-up camera image was distorted and unviewable. The vehicle had also experienced various electrical failures which included the headlights independently turning on while the vehicle was off. Additionally, while driving at undisclosed speeds, the message "Key Not Detected" was displayed. The vehicle also experienced the liftgate opening independently while driving. The contact also had difficulties starting the vehicle. The vehicle was taken to the local dealer who diagnosed that the rear camera wire connector had failed due to water damage. The connector was replaced but later the failure reoccurred. The manufacturer was notified of the failure. The failure mileage was 20,000.
The contact owns a 2018 Ford Explorer. The contact stated while reversing, the back-over prevention camera system failed to function as intended. The contact stated the back-over prevention camera seized and displayed a black screen. The vehicle was taken to the dealer where it was diagnosed with a failed back over prevention camera system. The contact was informed that the back over prevention camera system needed to be replaced. The vehicle was not repaired. In addition, the contact stated that the vehicle was taken to the dealer twice due to the persistent failure. The manufacturer was made aware of the failure but provided no assistance. The failure mileage was approximately 200. The VIN was unavailable.
The contact owns a 2018 Ford Explorer. The contact stated that while his wife was reversing from the garage, the rearview camera was inoperable. There was no warning light illuminated. The contact stated that the failure had been reoccurring. The dealer was notified of the failure and informed the contact that the failure might be due to a computer software issue. The dealer also advised the contact to bring the vehicle in for a diagnosis. The manufacturer was notified of the failure and advised the contact to take the vehicle to the dealer for diagnosis. The vehicle was not diagnosed or repaired. The failure mileage was approximately 54,800.
The contact owns a 2018 Ford Explorer. The contact stated that initially, the infotainment screen would intermittently fail to operate upon the start of the vehicle without warning. Recently, the contact stated that the infotainment screen had completely failed and that the screen had remained blank while the vehicle was in operation. Due to the failure, the back over prevention camera was inoperable. The contact called the manufacturer who then referred him to the NHTSA for assistance. The vehicle had yet to be repaired. The failure mileage was approximately 33,000.
The contact owns a 2018 Ford Explorer. The contact stated that while operating the vehicle, the display screen became inoperable. During the failure, the back over prevention camera was inoperable, and features including the engine temperature gauge was not available to the driver. The vehicle was taken to the local dealer who diagnosed that the D-Pin needed to be replaced. No further information was available. The vehicle was not repaired. The manufacturer was notified of the failure, but no assistance was offered. The failure mileage was 100,000.
The contact owns a 2018 Ford Explorer. The contact stated that while driving at an undisclosed speed, the infotainment screen was inoperable. No warning lights were illuminated. The vehicle was taken to a local dealer, where it was diagnosed that the application programming interface module (APIM) needed to be replaced; however, the part for the repair was on backorder. The vehicle was not repaired. The manufacturer was made aware of the failure. The approximate failure mileage was 89,000.
The contact owns a 2018 Ford Explorer. The contact stated that occasionally while shifted into reverse(R), the rearview camera failed to properly display the image behind the vehicle. There was no warning light illuminated. Additionally, the contact stated that the failure had progressed. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 100,265.
The contact owns a 2018 Ford Explorer. The contact stated the rearview camera screen was blue and inoperable. The contact stated the "Camera not Available" warning light was illuminated. The contact took the vehicle to the local dealer, where it was diagnosed with needing the rearview camera to be replaced. The vehicle was not repaired. The manufacturer had been informed of the failure. The failure mileage was approximately 40,000.
The contact owns a 2018 Ford Explorer. The contact stated that on several occasions while in reverse, the back-over prevention screen displayed a black screen preventing the image from being seen. The vehicle was taken to a dealer where it was diagnosed that the APIM needed to be replaced. The vehicle was not repaired. The contact stated that the manufacturer was notified of the failure. The failure mileage was approximately 90,000.
Collision Avoidance complaints in other Explorer years
Frequently asked questions
How common are collision avoidance problems on the 2018 Ford Explorer?
NHTSA has 31 complaints about the driver assistance of the 2018 Ford Explorer, 4% of the model year's 734 complaints. The component named most often is sensing system › camera (7 mentions).
Is there a recall for 2018 Ford Explorer collision avoidance problems?
No. NHTSA lists no driver assistance recall for the 2018 Ford Explorer, though it has 7 recalls for other components. If the problem is widespread, a repair may still be covered by an extended warranty or a manufacturer service bulletin — ask a dealer.
At what mileage do 2018 Ford Explorer collision avoidance problems start?
Half of the complaints with a recorded mileage happened before about 55,000 miles, and 25% before 25,000 miles.
Is it dangerous?
Owners linked 2 crashes, 0 fires and 1 injury to driver assistance problems on this model year. If you notice symptoms, have the car checked before driving further.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) — owner complaints through October 20, 2026, recalls and defect investigations; fuel economy from the EPA. Complaints are unverified reports and are not proof of a defect. How we rate model years.