Which parts fail
Components named in complaints (automatic emergency braking, adaptive cruise, lane keeping, backup camera).
Mileage when the problem started
Owner reports
Selected complaints filed with NHTSA by 2021 Ford Edge owners, lightly cleaned up (personal details are redacted by NHTSA).
The contact owns a 2021 Ford Escape. The contact received notification of NHTSA Campaign Number: 25V315000 (Back Over Prevention); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that the infotainment center screen blacked out intermittently. A message indicating that a blocked cylinder was causing the cruise control to fail to engage was displayed on the infotainment center. The contact stated that the cruise control would disengage independently after approximately two minutes. Additionally, the contact stated that the Forward Collision Avoidance: Automatic Emergency Braking and other collision mitigation systems failed to function as needed while driving. …
The contact owns a 2021 Ford Edge. The contact received notification of NHTSA Campaign Number: 22V151000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that the rear-view camera displayed a distorted image. The vehicle was taken to the dealer; however, the dealer was unable to perform the recall repair due to the module configuration data being missing from the Ford server. The vehicle was not repaired and remained at the dealer. The manufacturer was made aware of the failure and advised the contact to file a complaint with the NHTSA Hotline. The failure mileage was approximately 15,130. Parts distribution disconnect.
The contact owns a 2021 Ford Edge. The contact stated that the display screen was intermittently inoperable. No warning lights were illuminated. The contact stated that the failure was more frequent while starting the vehicle and then shifting into reverse. The contact stated that the display screen failed to produce an image when the vehicle was shifted into reverse. The vehicle was taken to a local dealer to be diagnosed; however, the contact was informed that no failure was found because the display screen had started working as needed. The contact was able to drive normally; however, the failure reoccurred. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 35,000.
1) The lane keeping assistance feature was engaged. 2) I observed an upcoming snow drift across the road. 3) I stepped on the brakes to slow down. 4) I observed there was no oncoming traffic (two lane road). 5) I moved over towards the center of the road to better navigate the snow drift. 6. The lane keeping assistance feature adjusted my steering to move me back into my lane (closer to the ditch). 7. The vehicle entered the snow drift with my wheels turned to the right. 8. The snow drift impaired the lane keeping assistance feature. 9. I lost control of the vehicle. 10. I hit a utility pole. Does the user manual instruct the operator to disengage the lane keeping assistance feature during snow and icy conditions?
I was driving the Ford Edge and the roads were a little slick so I was driving very slow. I was about 2 blocks from my house when I needed to engage the brakes to come to a complete stop, which happened to be going downhill toward a stop sign that intersected with a freeway off ramp. Both the brakes and ABS failed to engage and I hit a guard rail across the intersection. This caused significant damage to my vehicle and was very lucky that no one was hurt. The "Check Brake System" only came up after I ran into the guard rail, which was also the only time I needed to fully engage the brake to come to a full stop. The shop confirmed that the accident would not have damaged the brakes.
The contact owns a 2021 Ford Edge. The contact had received notification of NHTSA Campaign Number: 25V315000 (BACK OVER PREVENTION). The contact stated that the infotainment screen occasionally glitched or displayed a blank screen whenever a call was received or while the radio was activated. The contact stated that on several occasions the screen glitched while driving. No warning lights were illuminated. The vehicle was not taken to the dealer nor an independent mechanic. The vehicle was not repaired. The manufacturer was not made aware of the issue. VIN tool showed no open recalls. The failure mileage was approximately 60,000.
The contact owns a 2021 Ford Edge. The contact received notification of NHTSA Campaign Number: 25V315000 (Back Over Prevention). The contact had taken the vehicle to a local dealer, who was unable to complete the recall repair because the dealer was waiting on an Override Code from the manufacturer. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was informed of the issue but was unable to help. The contact had not experienced a failure.
The contact owns a 2021 Ford Edge. The contact had received notification of NHTSA Campaign Number: 25V315000 (Back Over Prevention); however, the local dealer and the manufacturer were contacted, and informed the contact that the VIN was not associated with the recall. The contact explained that a recall letter was removed from the manufacturer and was informed that the VIN was not associated with the recall. The contact stated that the rear-view camera experienced failure for approximately one year. The failure mileage was 29,821.
The contact owns a 2021 Ford Edge. The contact stated that while reversing, the rearview camera image was distorted. The dealer was notified of the failure. The vehicle was not diagnosed or repaired. The contact became aware that the VIN was included in NHTSA Campaign Number: 25V315000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The manufacturer was not notified of the failure. The failure mileage was approximately 42,000. VIN tool confirms parts not available.
Subject: Complaint Regarding Ford Safety Recall 25S28 - Unresolved APIM Module Issue Vehicle Information: Year/Model: 2021 Ford Edge Recall: Ford Safety Recall 25S28 Defect: Rear-view camera and APIM module software malfunction. Summary of Issue: June 2025: Attempted recall repair; dealer stated recall was on hold. August 2025: Received another recall notice but delayed repair since no issues were present. November 2025: Navigation system, CarPlay, and infotainment screen began shutting off. Dealer confirmed these functions are controlled by the APIM module covered under Recall 25S28. December 2025: Vehicle at dealer for ~2 weeks. Dealer attempted software update, then said Ford corporate approved replacing the telecommunications chip on Dec 12. On Dec 16, dealer informed me Ford put the recall on hold again and instructed me to pick up the car without the fix. …
Related recalls
Back over prevention › Software
Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.
Remedy: The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed April 13, 2026. Owners may contact Ford Customer Service at 1-866-436-7332.
Back over prevention › Software
Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco, F-150, 2021-2024 Edge, 2022-2025 Escape, F-250, F-350, F-450, F-550, F-600, 2022-2024 Expedition, 2022-2025 Transit, 2021-2023 Mach-E, 2024 Ranger, Mustang, 2021-2023 Lincoln Nautilus, 2022-2024 Navigator, and 2023-2024 Corsair vehicles.
Remedy: The accessory protocol interface module (APIM) software will be updated by a dealer or through an over-the-air update, free of charge.
Back over prevention › Software
Ford Motor Company (Ford) is recalling certain 2021-2022 Edge vehicles previously repaired incorrectly under recall number 22V-151. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.
Remedy: Dealers will update the rearview camera software, free of charge. Owner notification letters were mailed April 25, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S28.
Back over prevention › Display function
Ford Motor Company (Ford) is recalling certain 2021-2022 Edge vehicles. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.
Remedy: The rearview camera software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on April 29, 2022.
Collision Avoidance complaints in other Edge years
Frequently asked questions
How common are collision avoidance problems on the 2021 Ford Edge?
NHTSA has 31 complaints about the driver assistance of the 2021 Ford Edge, 27% of the model year's 114 complaints. The component named most often is sensing system › camera (5 mentions).
Is there a recall for 2021 Ford Edge collision avoidance problems?
Yes — NHTSA recall 26V-124 (software, Mar 3, 2026); NHTSA recall 25V-315 (software, May 9, 2025); NHTSA recall 25V-160 (software, Mar 14, 2025). Recall repairs are free at authorized dealers.
At what mileage do 2021 Ford Edge collision avoidance problems start?
Half of the complaints with a recorded mileage happened before about 42,000 miles, and 14% before 25,000 miles.
Is it dangerous?
Owners linked 3 crashes, 0 fires and 0 injuries to driver assistance problems on this model year. If you notice symptoms, have the car checked before driving further.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) — owner complaints through October 20, 2026, recalls and defect investigations; fuel economy from the EPA. Complaints are unverified reports and are not proof of a defect. How we rate model years.