2014 Ram 2500 Steering Problems

Which parts fail

• Linkages
  1

Components named in complaints (power steering, steering column, rack and pinion).

Mileage when the problem started

• Under 25k
  821%
• 25k–50k
  1333%
• 50k–75k
  513%
• 75k–100k
  923%
• 100k–150k
  38%
• 150k+
  13%

Owner reports

Selected complaints filed with NHTSA by 2014 Ram 2500 owners, lightly cleaned up (personal details are redacted by NHTSA).

The contact owns a 2014 Ram 2500. The contact stated that while driving at 65 MPH, the steering wheel shifted while turning. The contact self-diagnosed the vehicle and found that there was slack in the track bar and brackets that needed to be reinforced. The vehicle was not diagnosed or repaired by a dealer or independent mechanic. The manufacturer was notified of the failure. The failure mileage was approximately 175,000.

On the night of September 15, 2023, I was driving home from work around 8:00 pm. I hit a bump on the interstate and my truck started the "death wobble". Having driven a Dodge truck for a very long time, I was aware of what was going on. The vehicle starts to "wobble" uncontrollably until you come to a complete stop. I was doing 70 mph and in the left lane when this happened, it immediately pulled me to the ditch in the right lane on the side of the interstate. I researched the problem and found that it had an R46 recall and the bracket in said recall had been ripped from the frame and broken in half. I hauled the vehicle to Jeff Wilson Chrysler in Brookhaven and they sent pictures to whomever for the recall and it was denied for some reason. The Service Manager then sent it to someone else because he thought that it should have been fixed based off what he has seen. …

A Recall on the Drag Link Bar was for a bolt coming loose. The recall was to weld the bolt, so Drag Link Bar could not be adjusted or bolt come loose. I am the original owner and in order to do an updated alignment, I now need to buy a new adjustable drag link bar, because the original one can not be adjusted due to the recall fix was to weld a nut, so it cold not back off. So a $80 alignment charge, is now going to cost me $1000 because I have to buy a new Drag Link Bar. I have contacted RAM, they said the will not do anything, they fulfilled the Recall. Why would the NHTSA allow a fix to be a welded nut on a steering arm that might need to be adjusted for alignment? So it would of been better for me to not do the recall and wait for it to fail and then get a new drag link bar. My Drag Link bar does not need to be replaced due to age of vehicle or wear and tear. …

The Front Suspension Track Bar Frame Bracket R46/NHTSA 15V-541. There was a recall issued in 2016 that impacted around an estimated 150,000+ vehicles. I purchased my Truck in 2020, and according to records this problem was fixed in 2016. I recently noticed something seriously wrong with the front suspension while driving, and just about lost control of my vehicle on the highway. After taking it to a certified maintenance technician for Dodge Ram, they found that the Recall was not completed at all. This problem involves faulty welding and the weld can break loose at any given moment without being fixed properly with a stability bracket. Mine gave loose on the highway going 70mph. My concern is how many other vehicles were marked as fixed, but in actuality were not.

My Ram 2500 truck is in need of repair under the R46 recall. On 8/4/2021 the dealership inspected my truck and claimed they had ordered parts and the repair will not be completed until June 2022. The recall bulletin states that a failure of the track bar frame bracket can cause a sudden crash without warning. There is a frequent popping or "clunk" sound coming from under the truck when turning and when going over bumps. This is my daily driving vehicle. I do not think it is safe to drive this truck for another 25,000-30,000 miles while waiting for these parts. This truck has been in the same dealer service center at least three times since 2015 for recall repairs and each time they have failed to address the R46 recall.

Steering has been pulling hard to the right. This makes it harder to steer especially at highway speeds with a larger vehicle. Had two 4 wheel alignments and it was brought to my attention on my last alignment that the nuts on my adjuster sleeve had been cut off and therefore the reason of the bad alignment. They said that this will cause a continual alignment issue if not resolved. I contacted a Dodge dealership and they are willing to do an inspection, but out of my pocket. I really can't afford an inspection since I was told this issued has been under recall in the past. Also there are no stickers or labels indicating a recall was ever performed on the vehicle prior to me purchasing it.

I took my 2014 Dodge Ram 2500 (VIN: [redacted] ) to Glendora Chrysler Dodge Jeep Ram on Lone Hill Ave. for Recall R46. The dealership kept my truck most of the day but did not perform the recall. Instead, they told me something untrue-that my upgraded suspension made the repair impossible-without ever attempting the repair. They then tried to pressure me into signing a waiver of liability stating the recall could not be performed and gave me the runaround when I refused. This dealership was unwilling to help me and misled me instead of completing a federally mandated safety recall.

The contact owns a 2014 Ram 2500. The contact received notification of NHTSA Campaign Number: 19V021000 (Steering); however, the part to do the recall repair was not yet available. The local dealer was contacted; however, the part was not available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue but offered no assistance. The contact had not experienced a failure.

Negligent service. How could be possible to measure assembly threads without a torque wrench? I regret bringing the vehicle for the recall. Passed two weeks, and the RamCare and dealer did not contact to fix. It's dubious if all performed recall V06 was executed correctly at the dealer. Owners and dealer may think that the recall will not bring any risk for the owner. See attached pictures and the procedure.

Since purchasing in 2014 I have had my truck in and out of RAM Dealerships for steering issues and braking issues. Repeatedly told that it's a RAM. A steering linkage recall was received and I took it in to have it done. Problem has been there continuously. The water pump issues continue Brakes are still an issue BUT I have been told at the Dealerships that they are hydraulic and they work differently.

Related recalls

NHTSA investigations

Steering complaints in other 2500 years