2016 Ford Mustang Collision Avoidance Problems

Which parts fail

• Sensing system › Camera
  19
• Blind spot detection
  3
• Rearview system braking
  2
• Warnings
  2

Components named in complaints (automatic emergency braking, adaptive cruise, lane keeping, backup camera).

Mileage when the problem started

• Under 25k
  525%
• 25k–50k
  210%
• 50k–75k
  840%
• 75k–100k
  525%
• 100k–150k
  00%
• 150k+
  00%

Owner reports

Selected complaints filed with NHTSA by 2016 Ford Mustang owners, lightly cleaned up (personal details are redacted by NHTSA).

The contact owns a 2016 Ford Mustang. The contact received notification of NHTSA Campaign Number:22V082000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated on 5/17/2022, his wife was using the rearview camera to reverse out of their garage and crashed into their other vehicle. The contact called the local dealer and made them aware of the failure. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was 62,571. VIN tool confirms parts not available.

The contact's daughter owns a 2016 Ford Mustang. The contact stated that the rearview camera was inoperable while reversing. The owner received notification of NHTSA Campaign Number: 25V572000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The vehicle was taken to the dealer, where the contact was informed that the vehicle had passed the recall test, even though the part to do the recall repair was not yet available. Additionally, the contact stated that the rearview camera failure persisted. The vehicle was taken back to the dealer, where the contact was informed that the rearview camera needed to be replaced. The dealer advised the contact that the VIN was not included in a related recall; however, the VIN was included in NHTSA Campaign Number: 25V572000 (Back Over Prevention). The vehicle was not repaired. …

The contact owns a 2016 Ford Mustang. The contact received notification of NHTSA Campaign Number: 22V082000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The contact stated that the rear-view camera image was blank while reversing. Additionally, the trunk door would no longer open. The contact stated upon inspecting the wiring harness of the trunk, he noticed that the wires were fractured. The contact added wires to the trunk wiring harness as a temporary fix. There was no warning light illuminated. The local dealer was contacted. The vehicle was not diagnosed nor repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 52,000. Parts distribution disconnect.

The contact owns a 2016 Ford Mustang. The contact stated that the rearview camera would project a blank or distorted image while in operation. The contact then received a notification for NHTSA Campaign Number: 22V082000 (Back Over Prevention). The dealer was notified about the recall and informed the contact that the vehicle had to be inspected before performing the recall repair. The contact stated that the vehicle had been inspected on three separate occasions but each time the dealer failed to perform the recall repair. The contact stated that the recall notification did not mention any stipulations regarding the recall repair. The manufacturer and the dealer had exceeded a reasonable amount of time for the recall repair. The failure mileage was approximately 50,000. VIN tool confirms parts not available.

The contact owns a 2016 Ford Mustang. The contact stated that while attempting to park the vehicle, the contact became aware that the rearview camera was inoperable. There was no warning light illuminated. The contact stated that the rearview camera image was blank. The vehicle was taken to the dealer where it was diagnosed that the deck lid wiring harness had failed and needed to be replaced. The vehicle was repaired; however, the failure recurred. The vehicle was taken to the dealer where it was diagnosed that the deck lid wiring harness failed again and needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 15,433.

The contact owns a 2016 Ford Mustang. The contact received notification of NHTSA Campaign Number: 22V082000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the rearview camera screen turned black while reversing. The contact stated that the failure occurred very frequently. There was no warning light illuminated. The dealer was notified of the failure. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 28,000.

The contact owns a 2016 Ford Mustang. The contact stated that while shifted into reverse(R), the rear-view camera was blank and then operated intermittently; however, the image was blurry. The vehicle was taken to a dealer on two occasions. During the first visit, the contact was informed that the harness needed to be replaced. The vehicle was repaired, but the failure persisted. The vehicle was then taken to a different dealer, where it was diagnosed and determined that the camera needed to be reprogrammed. The vehicle was repaired, but the failure persisted during the first inclement weather. The manufacturer was not notified of the failure. The failure mileage was approximately 72,000.

The contact owns a 2016 Ford Mustang. The contact stated that upon shifting the vehicle into reverse, the rearview camera displayed a distorted image and a blue screen, compromising the back-over prevention system. The message "Camera Not Available" was displayed. The vehicle was taken to the dealer and was repaired. The contact stated that the dealer called back and informed the contact that the rearview camera failed to function as intended. The contact stated that the only the decklid wiring harness was replaced. The dealer refused to repair or replace the rearview camera. The manufacturer was not notified of the failure. The failure mileage was approximately 59,700.

The contact owns a 2016 Ford Mustang. The contact received notification of NHTSA Campaign Number: 22V082000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that the rear-view camera displayed a blank image. The dealer was made aware of the failure but confirmed that parts were not yet available. The vehicle was not repaired. The manufacturer was made aware of the failure but confirmed that parts were not yet available. The failure mileage was approximately 18,000. VIN tool confirms parts not available.

The contact owns a 2016 Ford Mustang. The contact received notification of NHTSA Campaign Number: 22V082000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The contact stated that the rearview camera failed to engage while reversing. The message "No Camera Available" was displayed. The local dealer was contacted. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 94,000. Parts distribution disconnect.

Related recalls

Collision Avoidance complaints in other Mustang years