2011 BMW 128i Engine Problems

Mileage when the problem started

• Under 25k
  00%
• 25k–50k
  110%
• 50k–75k
  00%
• 75k–100k
  220%
• 100k–150k
  770%
• 150k+
  00%

Owner reports

Selected complaints filed with NHTSA by 2011 BMW 128i owners, lightly cleaned up (personal details are redacted by NHTSA).

The contact owns a 2011 BMW 128i. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that while driving at an undisclosed speed, the vehicle lost motive power. There was smoke coming from under the hood. The vehicle was towed to an independent mechanic and diagnosed with engine failure. The mechanic informed the contact that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 113,000. VIN tool confirms parts not available. (RECALL RELATED INCIDENT) TS

The contact owns a 2011 BMW 128i. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that while the vehicle was idle at a red light and attempting to accelerate to make a right turn, the traction control warning light and the ABS warning light flashed with an error message. The vehicle the accelerated unintentionally. The contact had to straighten the steering wheel to regain control of the vehicle after the vehicle had fishtailed. The vehicle regained normal function. The contact stated that there was smoke coming from the rear passenger's side of the vehicle and also inside the cabin of the vehicle. …

The contact owns a 2011 BMW 128I. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that while stopped at a traffic signal, the contact heard an abnormal rattling sound coming from the engine compartment. The contact stated that the check engine warning was illuminated. The contact stated that he depressed the accelerator when the traffic signal changed, and the rattle was louder. The contact drove the vehicle back to the residence and parked. The vehicle was not taken to a dealer or independent mechanic. The vehicle was not diagnosed or repaired. …

The contact owned a 2011 BMW 128i. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the repair was unavailable. The contact had experienced a failure. The contact stated as he pulled into a parking lot at approximately 5 MPH he began to smell a burning plastic odor. The contact said that the vehicle dash vents began to issue gray smoke. The contact had parked the vehicle and turned it off, he opened the hood and the vehicle engine compartment immediately ignited. The contact stated that the fire department was called and extinguished the fire with foam. The police also arrived on the scene and filed a report. The vehicle had to be towed to an impound lot and was no longer drivable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. …

The contact owns a 2018 BMW 128I. The contact stated while driving at various speeds, the vehicle stalled. While at a stop sign, the vehicle stalled. The check engine warning light was illuminated. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was contacted. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was approximately 102,000. VIN tool confirms parts not available.

The contact owns a 2011 BMW 128i. The contact stated that on several occasion while driving, the vehicle stalled without warning. The contact also stated that when she attempted to restart the vehicle, the engine failed to turn over. No warning lights were illuminated. Additionally, the contact stated that the engine would randomly start. The contact stated that the electrical system failed to operate as designed. The vehicle was taken to the dealer where the cause of the failure could not be determined. The manufacturer was notified by the dealer of the failure and the contact was informed that a case was opened. The failure mileage was approximately 48,000.

The contact owns a 2011 BMW 128I. The contact stated that on several occasions while driving at various speeds, the vehicle hesitated. The contact stated that on one occasion while driving at an undisclosed speed, the vehicle hesitated and then stalled. The vehicle was not able to restart. The vehicle was towed to the residence. The vehicle was then towed to a dealer, where it was diagnosed that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was approximately 120,000.

The contact owns a 2011 BMW 128I. The contact stated while driving at approximately 50 MPH, the vehicle was jerking and there was a hard vibration. The contact also stated that the vehicle experienced an intermittent unintended acceleration. The local dealer was contacted. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 149,000.

I received error code P052B and the car had a high pitched whistle and was way down on power. I had it towed to the nearest dealer for service. After speaking with the technician, they told me they'd gone through with a boroscope and saw nothing out of the ordinary and recommended a new valve cover since the PCV was bad. I opted to order replacement spark plugs, coils, an eccentric valve sensor, and figured why not replace the Vanos bolts while in there too. Unfortunately after getting the cover off, it's been discovered that 7! of the Vanos bolts have already either sheared off or backed out. Pretty much a worst case scenario as my car was built in 2010 and is just outside the 10 year unlimited mile warranty outlined in the service bulletin (https://static.nhtsa.gov/odi/rcl/201...4V176-2716.pdf). …

My car has been effected by the PCV recall since march 2022. Smoking profusely and smelling like burning electronics. This happened while my family and I were in the car. This recall has occurred on numerous BMW's with more than 917,000 needing to be recalled for it. This defective PCV can cause a fire meaning the vehicle is completely unsafe for me and my family to drive. This is the THIRD time for this recall. I am unable drive my car for safety reasons because of this recall and I have not had a vehicle for 2 months now. I called Crevier BMW and they told me, as of 6/21/22, that a fix will not be available for several months. This is unacceptable. BMW is not solving this recall in a timely manner and it has caused major issues with my life and going to work.

Related recalls

Engine complaints in other 128i years