Which parts fail
Components named in complaints (automatic emergency braking, adaptive cruise, lane keeping, backup camera).
Mileage when the problem started
Owner reports
Selected complaints filed with NHTSA by 2018 Jeep Wrangler owners, lightly cleaned up (personal details are redacted by NHTSA).
The contact owns a 2018 Jeep Wrangler. The contact stated while operating the vehicle, the backup camera was inoperable on several occasions. There were no warning lights illuminated. The backup camera would randomly work as designed. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure however, no further assistance was provided. The failure mileage was approximately 7,800.
Recurring issue with my Jeep where seemingly every light on the dash, as well as the blind spot detectors, illuminates. The lights are accompanies by warning messages that indicate that electronic stability control and parking sense are unavailable. ABS lights, Traction Control, stability control, the brake light, and prompts to service 4WD are present. The impact varies based on whether or not the car is in motion. When it is not, as in the case of a cold start, the transmission is locked in Park. When the car is in motion, power steering intermittently goes out. If you pull over and put the vehicle in park while the lights are illuminated (i.e. if they don't clear), the car will get stuck in park until the lights clear. …
I have been having electrical problems with my jeep for a couple of months. I took it in to my jeep dealer that found over fifty problem codes. They cleared the codes and drove it for 180 miles over two weeks and could not get anything to duplicate. Some codes- service shifter, abs not communicating, engine light, no speedometer, sway bar service, service 4 wheel drive, cruise control off, remote start off, and more. They had me take it home and let them know if it continues. It did so I took it to a different mechanic and he came up with 72 codes and he couldn't track any of them to a source. So I picked it up today and on the way home on the interstate curved overpass going 65 it suddenly veered to the right at the retaining wall. The power steering quite. It was all I could do to keep it from hitting the wall. If it would of been my wife driving she would of wrecked. …
My vehicle started showing the airbag light on and it ended up being the clock spring, many jeep wranglers have being recalled because the same issue. The clock spring is the one that controls cruise, airbag, horn, traction, etc. i took it to the dealership and they said the vehicle was showing the B1B02 code, witch the the same why all the other jeeps were recalled but there is not a recall yet for my year. I want to people be aware of the importance of it, because in a crash the airbag will not deploy and even not in a crash the cruise control could malfunction anytime. I got my vehicle repaired today for a total of $1137.00 that wasn't covered my extended warranty because they alleged the clock spring/airbag problem is reported very often. This is a really safety matter for all the jeep owners!!!
2018 Jeep Wrangler (JL) Sahara Safety features all disable with this issue: Power steering (this could happen on the highway) Stability (STC), Antilock Braking, Blind spot, etc. While driving their appears to be an electrical short. The steering wheel locks up and all lights on dashboard come on. Several error messages "Auto Park Disabled", "Speed Control Messaging Unavailable", "Service Antilock Brake System", "Service Transmission Continue in DRIVE. Do Not Shift or Turn Off Engine" - to name a few. Dealers turn me way with simple computer reboot solutions only for issue to reoccur. Issue presents itself intermittently. Dealer has regularly turned me away for being unable to replicate in non driving conditions.
While driving at low speed in heavy rain vehicle lost power steering, engine service light, anti lock brake failure, skid control. Had to remove vehicle from roadway and restart engine, which corrected steering failure. Engine service light remained on. Vehicle is garaged. After being in garage for 24hrs engine service went out. Contacted dealer and was given appointment. Recommended not drive vehicle until service. Vehicle has 18,000 miles on it. Was told by dealer that battery failed which is tired into the crawl feature of the of the Rubicon 2.0 liter engine with crawl electric motor. Also told that there were many service bulletins.
While driving at 55 mph the brake light, service abs system, check engine light, service 4wd, service transmission, loss of power steering, and engine cooling fan ran very fast. I was lucky to pull off the road and put the vehicle in Park. The 4 Way flashers would blink erratically. Engine still running wouldn't come out of Park. I turned the vehicle off.l let it set a few minutes. I then restarted the vehicle and it shifted into gear and drove home with the check engine light on. The next day it had no check engine light.
1. Electrical System: Instrument Cluster/Panel. AN Instrument Panel That Fails TO Display Critical Safety Information, Such AS THE Speedometer or Warning Lights, CAN Increase THE Risk OF A Crash. My VIN said there is no recall for this and my vehicle has this problem. 2. Blind Spot Warning becomes disabled and errors out periodically even when there are no issues with sensors and sensors are cleaned. When error occurs, the Blind Spot Warning lights remain active even when there are no objects in the blind spot.
The power steering went out while driving, check engine light came on, ABS Service, Service Shifter, Start/Stop unavailable, Service 4wd, Auto Park Disabled, Blind Spot Alert, Electronic Stability Control Service, Parking Sense Off. I could not shift out of Park. Many people are having this problem with their 2018 Wrangler JL and JLU and later models. All you have to do is Google this or go to YouTube to see. It may be a faulty ECU. In any case, this is a problem and a safety hazard.
In the middle of the intersection, the power steering turned off and the steering wheel locked. I could not move the steering. All dashboard lights came on as well as the emergency brakes. The gear shift also locked and refused to shift into any toner gear. The vehicle was completely disabled and would not restart. This is the 5 time this has happened. I took it to get serviced at my local jeep Chrysler dodge dealership and I am still receiving the same issue.
Related recalls
Back over prevention › Sensing system › Camera
Chrysler (FCA US, LLC) is recalling certain 2018-2024 Jeep Wrangler vehicles. The wiring harness for the rearview camera and the center brake light may short circuit, which can disable the rearview camera image and center brake light.
Remedy: Dealers replaced the harness for the center brake light and rearview camera and/or the spare tire carrier/harness assembly, as necessary, free of charge. All vehicles were repaired by January 15, 2024.
Collision Avoidance complaints in other Wrangler years
Frequently asked questions
How common are collision avoidance problems on the 2018 Jeep Wrangler?
NHTSA has 21 complaints about the driver assistance of the 2018 Jeep Wrangler, 1% of the model year's 1,827 complaints. The component named most often is blind spot detection (7 mentions).
Is there a recall for 2018 Jeep Wrangler collision avoidance problems?
Yes — NHTSA recall 24V-676 (camera, Sep 12, 2024). Recall repairs are free at authorized dealers.
At what mileage do 2018 Jeep Wrangler collision avoidance problems start?
Half of the complaints with a recorded mileage happened before about 7,000 miles, and 100% before 25,000 miles.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) — owner complaints through October 20, 2026, recalls and defect investigations; fuel economy from the EPA. Complaints are unverified reports and are not proof of a defect. How we rate model years.