Which parts fail
Components named in complaints (automatic and manual transmissions, CVT, axles, driveshaft, 4WD/AWD).
Mileage when the problem started
Owner reports
Selected complaints filed with NHTSA by 2014 Jeep Wrangler owners, lightly cleaned up (personal details are redacted by NHTSA).
The contact owns a 2014 Jeep Wrangler. The contact stated while driving 55-60 MPH, the vehicle shut off inadvertently. There was no warning light illuminated. The contact veered to the side of the road. The contact was able to restart the vehicle and drove to an independent mechanic where it was diagnosed that the failure was associated with the transmission. An unknown repair was completed. However, the failure reoccurred several months later. The vehicle was taken back to the independent mechanic where an unknown repair was completed; however, the failure persisted. The contact stated while driving up a steep hill, the vehicle shut off, almost causing another heavy vehicle to crash into the vehicle. The vehicle was taken back to the independent mechanic where an unknown repair was completed. The dealer and the manufacturer were not notified of the failure. …
When it first started, I would have to be going at minimum 55-60 mph. But it got so bad to the point that I would be going 15-20 mph and out of nowhere my vehicle would start violently shaking and my steering wheel would jerk side to side. The ONLY way to get it to stop would be to completely let off the pedals and let it come to a complete stop by itself. Hitting the brakes could cause it to flip. Having to come to a stop, regardless of the location could cause a serious accident or pile up. Trying to control the steering wheel when this is occurring could cause an accident as well. This is not something that happens here and there. This incident is so frequent that there are websites that try to warn and help others bc it happens so after. Its cost me $4000 trying to fix it. …
The vehicle will unexpectedly not be able to shift gears up or down suddenly due to a switch sensor located in the transmission transfer case that malfunctions due to corrosion due to lack of protection on the wiring which is exposed to the elements. I noticed this happening a few times before I had a chance to take it into the dealer repair shop. When I was on my way home from work commuting through evening rush hour, I was driving at normal residential street speeds and as traffic sped up my car did not shift gears but rather kept revving higher. I was driving along with traffic and noticed as we were slowing down it didn't downshift either. I was able to pull over and inspected the vehicle but didn't notice any wrong. I had to drive home with my hazards and at a set speed as much as possible. It was not a safe situation nor would it be good for the engine had it got pushed harder.
Abs ,traction control, and brake lights stay on I took it to the dealer they told me it was internal failure on the abs module I can't afford 1200$ to fix it I'm in a jeep club this is a common problem it should be recalled and fixed for free it's a safety hazard. And you lose power you can't even pass another car when all the lights are illuminated.
The other day I was changing the fluids in my transfer case and I noticed that the cv bolts were broken and coming out my Jeep is not lifted nor is there larger tires on it. If these all snapped the possibility the drive shift my fall out. If you contact me immediately I won't proceed with fixing the drive shaft if not I'm replacing it tomorrow.
Oil filter Housing and Intake Manifold had to be replaced dues a coolant leak. "Common" issue on Jeep's they said. But Despite knowing about this issue, the company has never issued a recall, instead, they redesigned the oil filter housing.
Parts R2123503AC & 68087998AA which are available for inspection failed while driving my vehicle a day after in was serviced by the dealer. I heard a loud bang emit from under vehicle. At which point all forward motion stopped & the vehicle would not move at all when the accelerator was pressed. The engine was running and all electrical components continued to function. It stopped in the road and was not able to make it to the shoulder without being pushed. Fortunately traffic was light and the vehicles behind me were able to stop before a collision. Had this happened on the highway or at an intersection the outcome could have been much worse. There were no warning lights prior to or after the failure. I had the vehicle towed to the dealer who requested 3 hours of shop time to disassemble the powertrain. At which point i was contacted and told i needed a new transfer case. …
Starting in March of 2024 the vehicle began to leak copious amounts of oil. This was noted once the vehicle was parked after driving. It was anywhere from the size of a half dollar to a dinner plate size of oil pooled underneath the oil filter housing on the ground. At this time the Jeep had approximately 103,000 miles. While diagnosing the issue, I had to consistently add many quarts of oil to keep the vehicle operating. During the diagnosis stage, there were many instances where a strong burning smell became obvious from the engine compartment. After consulting with two independent certified mechanics, it was determined that the oil filter housing had become compromised and was the source of the oil leak. The cost for repair was $175 for the part and $950 for labor, plus $200 for a rental. …
Parked vehicle on a slope in the mountains with the parking brake engaged. The vehicle is an automatic transmission and was in park. Immediately following all passengers exiting the vehicle, it slowly started rolling away, backwards. It traveled down a 4wd road a small distance before turning off and tumbling down the mountain. Luckily everyone had exited the vehicle and there were no injuries. Though we were parked on a slope, probably around 15 degrees, there was complete failure of both the park gear and the parking brake allowing a rollaway. The parking surfaces was a combination solid rock and dirt.
Tl* the contact owns a 2014 Jeep Wrangler. While at a stop light, the brake pedal was depressed and the vehicle jerked forward. As a result, the contact's vehicle crashed into the rear of another vehicle. There were no injuries and a police report was not filed. The vehicle was taken to a dealer, but it was not diagnosed or repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 20,000. The VIN was unavailable.
Transmission complaints in other Wrangler years
Frequently asked questions
How common are transmission problems on the 2014 Jeep Wrangler?
NHTSA has 88 complaints about the transmission & drivetrain of the 2014 Jeep Wrangler, 13% of the model year's 657 complaints. The component named most often is automatic transmission › control module (tcm/pcm/tecm) (1 mentions).
Is there a recall for 2014 Jeep Wrangler transmission problems?
No. NHTSA lists no transmission & drivetrain recall for the 2014 Jeep Wrangler, though it has 4 recalls for other components. If the problem is widespread, a repair may still be covered by an extended warranty or a manufacturer service bulletin — ask a dealer.
At what mileage do 2014 Jeep Wrangler transmission problems start?
Half of the complaints with a recorded mileage happened before about 44,000 miles, and 26% before 25,000 miles.
Is it dangerous?
Owners linked 5 crashes, 2 fires and 0 injuries to transmission & drivetrain problems on this model year. If you notice symptoms, have the car checked before driving further.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) — owner complaints through October 20, 2026, recalls and defect investigations; fuel economy from the EPA. Complaints are unverified reports and are not proof of a defect. How we rate model years.