2021 Jeep Grand Cherokee L Electrical Problems

Owner reports

Selected complaints filed with NHTSA by 2021 Jeep Grand Cherokee L owners, lightly cleaned up (personal details are redacted by NHTSA).

I just discovered my IPC module is faulty and has been faulty. My vehicle has been putting itself into park while driving multiple times now in the little over 2 years I've had it. Along with many other electrical issues (power steering going out) engine not cutting off after putting it I to park and cutting the jeep off. Dash going out. Biggest issue is my vehicle causing me near miss traffic accidents. The dealership it was purchased from, certified. Hid service history reports at the sale. Also returned this vehicle multiple times without acknowledging the issue or even telling me they didn't repair the issue. Last time it was picked up from Matt Bowers Jeep in Baton Rouge within 30 mins the issue was happening and more (rpms shooting up and Jeep taking off without giving it gas). I went public and another dealership reached out to help me. …

I am reporting a failure of the Steering Column Control Module (SCCM) in my 2021 Jeep Grand Cherokee L Overland. The failure is manifesting as an error message saying "service transmission" and the code that it is throwing says that the paddle shifters are overheating. This component is identical to the modules currently under Safety Recall 36B (NHTSA 24V-199) and Equipment Recall 15B (NHTSA 24E-025). The manufacturer has admitted that these modules possess an internal weld defect that prevents the driver's side airbag from deploying in the event of a crash. Despite the clear safety risk and the fact that this model year/body style (WL) is the primary population for this defect, the manufacturer (Stellantis/Jeep) refuses to cover the repair, stating my specific VIN is not "flagged" in their internal database. …

I experienced electrical issues that resulted in loss of steering and difficulty turning my 2021 Jeep Cherokee Laredo. The steering became very hard to turn, and warning lights were present. This created a safety concern because the vehicle was difficult to control. I took the vehicle to an authorized Jeep dealership in Midwest City, Oklahoma. The dealership diagnosed the issue as a fuse array and attempted a repair. The vehicle remained at the dealership for approximately five days. After the repair attempt, I was informed that the fuse blew and that the vehicle now requires replacement of the power steering assembly. I was unable to afford the additional repair. The vehicle was returned to me with the original steering problem unresolved and remains difficult or unsafe to operate. …

A vehicle was purchased at McLarty Daniel Chrysler Bentonville, AR. The sales department had a third party install a non-oem windshield. Dealer attempted repairs, but the records show discrepancies of statements and record. The dealer ignored the instructions to recalibrate the windshield, though the receipt stated "elevated risk of collision" if not calibrated. The owner had on going issues that service should have connected to the windshield and calibration. The windshield of this vehicle has immense safety features that were ignored. The liability to willfully hand over the keys of a known unsafe vehicle is high. …

The vehicle didn't automatic update of its "UCONNECT" system without warning after stopping at a gas station. Once the vehicle was turned back on after the update was completed there was a light on my dashboard signaling that the forward collision warning system is off. Some other things happened as well such as all my settings were reverted back to factory settings, and the menu screen was in Italian. After online research, it seems that this is a very common problem with the specific model. I was able to revert everything except for the Ford Collision , warning, which still states that it is OFF, after the update. After communicating all this information with Jeep, they want me to pay for a repair that was due to their system update.

I was due for an inspection sticker and my vehicle did not pass due to it initially during and not having driven enough miles to reset the code. I had drove enough miles and was going to get it reinspected but the battery died again. I had jumped my vehicle and drove it to reset the code again however upon stop at a red light the car turned over and wouldn't start up again. I had three of my kids in the car and can't imagine if I was not close to home with them or on a highway when this happened. There were no warnings and the police had to call in tow due the hazardous situation. The dealership said the issue was that the radio was causing battery drainage of both batteries in my car.

In May 2025 the vehicle randomly, and without warning, the instruments, gauges, and displays switched to Italian, changed to Metric, and we got the update and FCW Off light stuck on. Numerous other settings had been reset. Took to dealer and had to pay for the fix - they noted a STAR bulletin on my invoice. Then this past weekend (May 2, 2026) it happened again. At least this time it didn't go Italian and Metric on me, but lots of other settings were changed. Did not test the paddle shifters but will do that soon. Current software version says FCA-MY24.U29.42-PROD. I've seen other posts with a newer version - not sure if / why not on my Jeep yet.

One day, I tried to start my vehicle using the push start button, and it fell off into a hole. There were no indications or warning signs that the button was loose or needed to be replaced. When I took my vehicle to the dealership where I originally purchased it for routine maintenance, they never mentioned that the button had worn out. If it were an emergency situation where I had to turn the vehicle off and the button had randomly fallen off, there would be no other way to turn the vehicle off or on.

My dash cluster is completely blank. I am merely reporting this to the NHSTA for purposes of record and it being a very unsafe situation in not being able to see my speed among many other safety issues the cluster provides. This is a HUGE safety concern and caused me a great amount of stress trying to drive to work today. It looks as though Jeep has already provided a recall for a very similar issue with their Jeep Wranglers & Gladiator vehicles. I own a 2021 Jeep Grand Cherokee L - Attitude model.

Started driving home and heard the vehicle making clinking noises. Then the service 4wd light came on. It slips in shifting almost like the vehicle shuts down for a sec and then comes back. When you are sitting the vehicle will randomly jerk forward even in park mode. Like the brake releases and then comes back. It's very unsafe and with it shifting the way it does the actuator is failing which in return will cause a very bad accident. This car can just shut down at any given moment.

Electrical complaints in other Grand Cherokee L years