2026 GMC Yukon Engine Problems

33 owners have reported engine & cooling problems with the 2026 GMC Yukon to NHTSA — 79% of all 42 complaints for this model year. The typical failure happened around 5,000 miles. That ranks #11 of 32 Yukon model years for engine complaints (a typical year has 15). No engine recall has been issued for this model year.

33complaints
5ktypical miles
0related recalls
0crashes
0fires
0injuries

Mileage when the problem started

  • Under 25k
    4100%
  • 25k–50k
    00%
  • 50k–75k
    00%
  • 75k–100k
    00%
  • 100k–150k
    00%
  • 150k+
    00%

Owner reports

Selected complaints filed with NHTSA by 2026 GMC Yukon owners, lightly cleaned up (personal details are redacted by NHTSA).

The contact owns a 2026 GMC Yukon. The contact stated that while driving approximately 15-20 MPH and approaching a stop in Nebraska, there was an abnormal sound coming from the vehicle. The vehicle was shaking and vibrating abnormally. The contact called the local dealer, and an appointment was scheduled. The failures persisted while waiting for the appointment. While driving at an undisclosed speed, the vehicle lost motive power and stalled. The driver alerted OnStar about the failure. The vehicle failed to restart. The vehicle was towed to the local dealer, where it was diagnosed with complete engine failure. The contact was informed that the engine needed to be replaced. The vehicle was repaired; however, the contact no longer wanted the vehicle. The manufacturer was contacted and opened a case and escalated the concerns. The failure mileage was approximately 4,700.

5,000 miles · Aug 2026

The contact owns a 2026 GMC Yukon Denali. The contact stated that while driving approximately 55 MPH, the vehicle stalled and failed to return to normal operation. The message "Shifting to Neutral" was displayed on the instrument panel. The vehicle was towed to the dealer, where it was diagnosed, and determined that the engine needed to be replaced. The vehicle was not repaired. The contact researched and became aware of an unknown recall however, the VIN was not under recall. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline to report the failure. The failure mileage was approximately 3,303.

3,000 miles · Dec 2025

The contact owns a 2026 GMC Yukon. The contact stated that while driving 55 MPH and depressing the accelerator pedal, the vehicle failed to respond as intended. The contact pulled over to the side of the road, turned off and restarted the vehicle; however, the failure persisted. A dealer was contacted. The vehicle was towed to the dealer to be diagnosed, and the contact was informed that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure and informed the contact that there was a wait for the replacement engine. The approximate failure mileage was 3,788.

4,000 miles · Jul 2026

The contact owns a 2026 GMC Yukon. The contact stated that while driving at 65 MPH the engine seized. All the warning lights illuminated after the failure. The vehicle was towed to the local dealer, where it was diagnosed that an engine replacement was needed. The vehicle was not repaired due to the part being backordered. The manufacturer was not contacted. The failure mileage was approximately 10,000.

10,000 miles · May 2026

The vehicle experienced repeated failures involving the Electronic Stability Control (ESC), Traction Control System, and Check Engine system. Warning indicators for the ESC, traction control, and check engine illuminated while operating the vehicle. The issue has occurred on two separate occasions. The first incident occurred on May 4, 2026. The vehicle was taken to the dealership for inspection and repair, and the dealership advised that the issue had been corrected. However, the same problem reoccurred on May 7, 2026. The vehicle has been inspected by the dealership service department, and the malfunction was confirmed. The affected components and vehicle are available for inspection upon request. …

May 2026

So the ultimate failure is from a catastrophically failed crankshaft journal thrust bearing. Which could be caused from one of two things: 1) The crankshaft thrust bearings they are putting in these motors are made with inferior materials, probably cheap Chinese crap or 2) The crankshaft end play tolerance was never set properly, giving the crankshaft the ability to move forward and backward in the engine more than it was designed to. Which will over time beat up on the thrust bearing until it fails. In either case it would result in the same progressive issue showing itself. It will start as a squeak here and there. Which, as the soft thrust bearing material is unable to hold the proper oil film thickness for lubrication, will spiral into more and more heat being sent into the adjacent components, plus the buildup of metal particles being sent through the entire engine oiling system. …

Jun 2026

2026 Yukon Elevation with 3,957miles. I was driving down the road and pulled into the turn lane at an intersection. Vehicle cut off with the Auto Start/Stop function and would not start back up. I continued and tried to restart the vehicle but would not start; I was blocking the lane with cars continuously going around me. Vehicle stated service transmission on the display- I was unable to put it into neutral to push it out of traffic; You are only allowed to put it into neutral when crank and couldnt get the accessory mode to come on without the vehicle trying to start. I called the local police department and they sent an officer to direct traffic until a tow truck showed up. Both observed the vehicle not starting. There were no symptoms prior to the vehicle cutting off, only once auto start/stop initiated did the vehicle not restart. …

Mar 2026

My yukon denali ultimate had only 3,788 miles on it and on 7/27 while merging onto a highway my vehicle made a sound like it was trying to shift into gear but couldn't and then while I'm pressing the accelerator pedal it's slowing down. There were tractor trailer and vehicles speeding up behind me but I couldn't speed up and I was able to pull over on the shoulder luckily and I'm thankful it did not cause an accident. My yukon would not start no matter what I tried and I ended calling a tow truck and had it towed to my local GMC delearship where I was informed that the engine had seized and they would order a new replacement engine. My yukon is still sitting at the dealership waiting for the repair.

Jul 2026

The engine started a soft, cyclic tapping sound intermittently on 2/28/26 while I was out of town on a trip. No alerts showed on the GM systems app. On 3/1, while driving home from the trip, the car started hard braking at cruising speed and the engine died and would not restart. I had the car towed to the closest GM dealership and have been told the engine locked up. I just rolled 6000 miles and showed 18% oil life from the original engine oil it came with from the factory. I had been watching the engine problems for years now and waiting for them to be resolved before buying a new GM; only to be lied to that the issue was resolved. Now they're going to install yet another defective engine.

Mar 2026

While traveling at highway speeds of approximately 82 mph in a 2026 GMC Yukon Denali (6.2L V8 L87 engine), the engine experienced a sudden, catastrophic internal failure and completely seized without warning. This resulted in an immediate, total loss of motive power, power steering assist, and power braking assist while surrounded by high-speed traffic. The sudden deceleration and lack of vehicle control created an extreme, life-threatening safety hazard, forcing an emergency maneuver across multiple lanes to reach the shoulder. Stranded on shoulder at night(pitch black) with lots of 18 wheelers passing.

Aug 2026

NHTSA investigations

Loss of motive power due to engine failure post recall remedy

NHTSA investigation EA26005 · opened Aug 20, 2026 · open

On January 16, 2026, the Office of Defects Investigation (ODI) opened Recall Query RQ26001. This investigation was opened to assess the remedy effectiveness of Recall 25V-274. ODI has received complaints alleging engine failure in vehicles after the recall remedy had been completed, whether that remedy involved an oil viscosity change or a complete engine replacement.

Engine complaints in other Yukon years

’95’96’97’98’99’00’01’02’03’04’05’06’07’08’09’10’11’12’13’14’15’16’17’18’19’20’21’22’23’24’25’26497316315736251574716614156128393536283113217123173853833
Engine complaints per model year, GMC Yukon.

Frequently asked questions

How common are engine problems on the 2026 GMC Yukon?

NHTSA has 33 complaints about the engine & cooling of the 2026 GMC Yukon, 79% of the model year's 42 complaints.

Is there a recall for 2026 GMC Yukon engine problems?

No. NHTSA lists no engine & cooling recall for the 2026 GMC Yukon, though it has 3 recalls for other components. If the problem is widespread, a repair may still be covered by an extended warranty or a manufacturer service bulletin — ask a dealer.

At what mileage do 2026 GMC Yukon engine problems start?

Half of the complaints with a recorded mileage happened before about 5,000 miles, and 100% before 25,000 miles.

Source: U.S. National Highway Traffic Safety Administration (NHTSA) — owner complaints through October 20, 2026, recalls and defect investigations; fuel economy from the EPA. Complaints are unverified reports and are not proof of a defect. How we rate model years.