2019 Ford Fusion Transmission Problems

Which parts fail

• Automatic transmission › Torque converter
  4
• Automatic transmission › Lever and linkage › Floor shift
  1

Components named in complaints (automatic and manual transmissions, CVT, axles, driveshaft, 4WD/AWD).

Mileage when the problem started

• Under 25k
  415%
• 25k–50k
  14%
• 50k–75k
  519%
• 75k–100k
  830%
• 100k–150k
  830%
• 150k+
  14%

Owner reports

Selected complaints filed with NHTSA by 2019 Ford Fusion owners, lightly cleaned up (personal details are redacted by NHTSA).

The contact owns a 2019 Ford Fusion. The contact stated while driving approximately 55 MPH, the vehicle started to shake and vibrate abnormally. The contact stated there was an abnormal sound like an object striking the bottom of the vehicle. The contact stated that the vehicle started losing motive power. The contact stated that the accelerator pedal was depressed; however, the vehicle revived but failed to respond as needed. The contact stated that the check engine warning light was illuminated. The contact had taken the vehicle to a local dealer, where it was diagnosed and determined that the flex plate had cracked and needed to be replaced. The contact researched online and related the failure to manufacturer's Customer Satisfaction Program: 22N12 Flex Plate Cracks (Power Train). …

The contact owns a 2019 Ford Fusion. The contact stated while driving 40 MPH and above, the vehicle failed to accelerate as designed. The vehicle hesitated while accelerating. The contact stated the failure had occurred approximately 2 months after receiving the first diagnosis. The RPMs began increasing at the time of the second failure with the check engine warning light illuminated. The vehicle was taken to the dealer where it was diagnosed that the transmission failed and needed to be replaced. The failure reoccurred and the vehicle was towed to another dealer where it was diagnosed that the rear differential and the engine needed to be replaced. The vehicle had not been repaired. The manufacturer was made aware of the failure where it was confirmed that the repair was not covered under warranty or recall. …

The contact owns a 2019 Ford Fusion. The contact stated while parking the vehicle, the contact shifted to drive(D) to reverse(R) and the "System Fault - Service Required" message was displayed. The contact stated that the vehicle failed to drive or reverse as needed. The vehicle was towed to the dealer to be diagnosed and the contact was informed that the shifter cable bushing was missing, and that the vehicle had experienced the failure listed in NHTSA Campaign Number: 22V413000 (Power Train) however, the VIN was not included. The vehicle was repaired. The manufacturer was contacted, and a case was filed but no assistance was provided. The failure mileage was 70,945. The contact stated the dealer replaced the shift cable bushing and transmission shifter cable bushing. Also, installed a protective cap.

The contact owns a 2019 Ford Fusion. The contact stated while driving approximately 60 MPH, the vehicle started losing motive power. The contact stated that the vehicle was making an abnormal humming sound under the floorboards. The contact stated that an unknown warning light and the "WRENCH" symbol was displayed on the instrument panel. The contact was able to exit the highway however, the vehicle was no longer able to accelerate as designed. The contact stated that while depressing the accelerator pedal, the vehicle was only revving. The contact had the vehicle towed to a local dealer where it was diagnosed and determined that the transmission had failed and needed to be replaced. The vehicle was not repaired. The manufacturer was informed of the failure. The failure mileage was approximately 99,000.

The contact owns a 2019 Ford Fusion. The contact stated that while driving at various speeds, the vehicle shuddered with an engine misfire. There was no warning light illuminated. The vehicle was taken to the dealer on three separate occasions and diagnosed with a defective torque converter. The torque converter was replaced after remaining in dealer's possession for more than 30 days. The engine misfiring returned, and the vehicle hesitated while depressing the accelerator pedal. The vehicle was taken back to the dealer, but the contact was offered no assistance. The manufacturer was then notified of the failure and the contact was referred to the NHTSA Hotline. The vehicle was not repaired. The failure mileage was approximately 29,000.

The contact owns a 2019 Ford Fusion. The contact stated while attempting to start the vehicle, the vehicle hesitated to start. Additionally, the contact stated that the vehicle hesitated to respond while depressing the accelerator pedal. The check engine warning light was illuminated. The contact stated that the failure reoccurred while driving at various speeds and depressing the accelerator pedal. The dealer was contacted and informed the contact that they could not assist as the VIN was not included in a recall. The vehicle was not diagnosed nor repaired. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was approximately 92,770.

The contact owns a 2019 Ford Fusion. The contact stated that while the vehicle was idling the contact attempted to accelerate and the vehicle stalled and then inadvertently shifted to reverse. While attempting to correct the failure, the vehicle the failure reoccurred. The instrument panel showed that the vehicle was in reverse. The contact was unable to shift to the intended gear. The contact had the vehicle towed to the dealer who diagnosed that the transmission shift cable bushing failed and needed to be replaced. The vehicle had been repaired. The manufacturer was made aware of the failure and referred the contact to the NHTSA hotline. The approximate failure mileage was 80,000.

The contact owns a 2019 Ford Fusion. The contact stated while driving 30-35 MPH, the vehicle was making an abnormal flapping noise. The check engine warning light was illuminated with the wrench symbol displayed. The driver was able to pull over to the side of the roadway. The vehicle was taken to the local dealer, where it was diagnosed and determined that the flex plate needed to be replaced. The vehicle was not repaired. The manufacturer was contacted, and the contact was referred to the NHTSA Hotline. The contact stated that the failure was related to Customer Satisfaction Program: 22N12. The failure mileage was approximately 84,009.

The contact owns a 2019 Ford Fusion. The contact stated while driving at an undisclosed speed, the check engine warning light illuminated. Upon reaching the destination, the vehicle failed to restart. After several attempts, the vehicle started, and the contact heard an abnormal rattling sound coming from the engine compartment. The vehicle was towed to the dealer, who diagnosed failures with the transmission, flex plate, purge valve, and a bent solenoid. The vehicle was not repaired. The manufacturer was notified of the failure but referred the contact to the NHTSA Hotline for assistance. The failure mileage was 109,000.

The contact owns a 2019 Ford Fusion. The contact stated that upon starting the vehicle and shifting the gear selector into the drive position the vehicle shifted back into park on its own. After which a warning message displayed reading "Transmission shifter fault." The transmission warning light was illuminated. The vehicle was towed to the dealer, who diagnosed a failure with the shifter bushing. The vehicle was repaired. The manufacturer was notified of the failure, a case was opened, and the contact was referred to the NHTSA hotline for assistance. The failure mileage was 131,000.

Transmission complaints in other Fusion years