Which parts fail
Components named in complaints (doors, hood, frame, rust, paint and trim).
Mileage when the problem started
Owner reports
Selected complaints filed with NHTSA by 2019 Ford Flex owners, lightly cleaned up (personal details are redacted by NHTSA).
The contact owns a 2019 Ford Flex. The contact stated that the rearview camera was inoperable or displayed an inverted image while reversing. The contact stated that while reversing, the rearview camera was inoperable, causing the vehicle to hit another parked unoccupied vehicle on one occasion, and the vehicle hit a dumpster pole on another occasion. There was no injury sustained. The contact's vehicle was damaged, but the other vehicle was more damaged. The vehicle was taken to the dealer, where the infotainment system was replaced; however, the rearview camera failure persisted, and the rearview camera displayed a narrow view occasionally. Additionally, the contact stated that the exterior door B-pillar trim had detached and was previously replaced. …
The contact owns a 2019 Ford Flex. The contact stated that while driving the vehicle at unknown speeds, the passenger's side rear door panel detached from the vehicle. The contact stated that it was unknown if the panel crashed into another vehicle. The vehicle was taken to the dealer. The vehicle was repaired, however, the failure recurred with the same part, however, the panel was not completely detached, it was loose. The failure recurred when the panel detached and crashed into another vehicle. There were no known injuries. There was no police report filed. The dealer was contacted. The manufacturer was made aware of the failure. The failure mileage was approximately 5,000.
The contact owns a 2019 Ford Flex. The contact stated that while driving at an undisclosed speed, the front passenger's side B-pillar trim detached. The vehicle was taken to the dealer, where it was diagnosed with a detached front passenger's side B-pillar trim. The contact was advised that the front passenger's side B-pillar trim needed to be replaced. The vehicle was repaired. The contact stated that later, while driving at an undisclosed speed, the front driver's side B-pillar trim detached and flew off the vehicle. The vehicle was taken to the dealer, where it was diagnosed with a detached front driver's side B-pillar trim that needed to be replaced. The contact was informed that parts were not yet available. In addition, the contact was informed that the parts could be ordered from a secondary vendor. …
The contact owns a 2019 Ford Flex. The contact received notification of NHTSA Campaign Number: 25V695000 (BACK OVER PREVENTION) and 25V732000 (STRUCTURE); however, the parts to do the recall repairs were not yet available. The contact stated that the rearview camera displayed a black screen while the vehicle was in reverse(R). The contact stated that the failure obstructed the driver's visibility, which prevented the driver from safely operating the vehicle. The message "Rear-view Camera Unavailable" was displayed on the screen. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. The contact stated that on a separate occasion, while driving at an undisclosed speed, the driver's side B-pillar trim detached from the vehicle. …
The contact owns a 2019 Ford Flex. The contact stated that while reversing, the rear-view camera went blank and flashed on and off. The contact stated that while attempting to latch the front driver's seat belt, the seat belt failed to retract as intended. The contact stated that the seat belt was stuck. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact received notifications of NHTSA Campaign Numbers: 25V829000 (Structure) and 24V951000 (Back Over Prevention); however, the parts to do the recall repairs were unavailable. The contact stated that the failure was a persistent failure. The contact stated that the rear-view camera failure was an inconvenience and a hazard due to a disability. The contact stated that turning the neck was painful while reversing. The manufacturer was made aware of the failure but provided no assistance. …
The contact owns a 2019 Ford Flex. The contact received notifications of NHTSA Campaign Numbers: 24V951000 (Back Over Prevention) and 25V829000 (Structure); however, parts for the recall repairs were unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for parts to be available. The contact stated that while driving approximately 45 MPH, the B-pillar trim on the front driver's side door detached from the top of the door, causing the top half of the trim to separate from the rest of the trim. The contact stated that the same trim on the rear driver's side door had slightly detached. The back over prevention camera was inoperable and only displayed a black screen and made a beeping sound while in reverse. The dealer was contacted and failed to confirm when parts would be available. The failure mileage was approximately 80,000.
The contact owns a 2019 Ford Flex. The contact stated that while attempting to reverse(R), the rear-view camera became inoperable. The contact stated that the rear-view camera failed intermittently, with the image appearing and disappearing, or being upside down. Occasionally, the rear-view camera displayed a blank screen. The contact received notifications of NHTSA Campaign Numbers: 24V951000 (Back Over Prevention) and 25V732000 (Structure); however, the parts for the recall repairs were not yet available. The dealer was contacted. The vehicle was not diagnosed or repaired. The dealer confirmed that parts were not yet available. The manufacturer was made aware of the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. The approximate failure mileage was 94,000.
The contact owns a 2019 Ford Flex. The contact stated that while in reverse(R), the rearview camera image occasionally displayed a blank or blue screen. The contact then received notification of NHTSA Campaign Number: 24V951000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact called the dealer on several occasions about the recall and was informed that parts were still unavailable. In addition, the contact recently received notification of NHTSA Campaign Number: 25V732000 (Structure); however, the part for the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. The manufacturer was made aware of the failure. The failure mileage was approximately 35,000.
The contact owns a 2019 Ford Flex. The contact received notifications of NHTSA Campaign Numbers: 24V951000 (Back Over Prevention) and 25V732000 (Structure); however, the parts to do the recall repairs were unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that the windshield trim was detaching, causing water to leak into the vehicle on the driver's side. While in reverse, the back over prevention camera displayed the image of the rear of the vehicle that was upside down, or there was no image displayed. The dealer was contacted, and it was confirmed that the parts were not available for the recall repairs. The manufacturer was not made aware of the issue. The failure mileage was approximately 50,000.
The contact owns a 2019 Ford Flex. The contact stated that while attempting to reverse, the rear-view camera became inoperable. The rear-view camera image was distorted and upside down. The contact received notifications of NHTSA Campaign Numbers: 24V951000 (Back Over Prevention) and 25V732000 (Structure); however, parts to do the recall repairs were not yet available. The vehicle was taken to the dealer where it was diagnosed and determined that the camera system had failed and needed to be replaced. The dealer confirmed that parts were not yet available. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The approximate failure mileage was 117,000.
Related recalls
Structure › Body
Ford Motor Company (Ford) is recalling certain 2017-2019 Flex vehicles. The driver and front passenger B-Pillar door trim may detach while driving.
Remedy: Dealers will repair or replace the B-pillar trim as necessary, free of charge. Interim letters, notifying owners of the safety risk, were mailed December 17, 2025.
NHTSA investigations
B-Pillar Trim Detachment
On August 7, 2025, the Office of Defects Investigation (ODI) opened PE25007 to investigate instances of B-pillar trim detachment in model year (MY) 2019 Ford Flex vehicles manufactured by Ford Motor Company. During the investigation, MY 2011-2018 Ford Flex vehicles were analyzed as peer vehicles, and subsequently incorporated into the subject population because they use B-pillar trim pieces that are substantially…
Body complaints in other Flex years
Frequently asked questions
How common are body problems on the 2019 Ford Flex?
NHTSA has 59 complaints about the body & structure of the 2019 Ford Flex, 23% of the model year's 256 complaints. The component named most often is body (16 mentions).
Is there a recall for 2019 Ford Flex body problems?
Yes — NHTSA recall 25V-732 (body, Oct 24, 2025). Recall repairs are free at authorized dealers.
At what mileage do 2019 Ford Flex body problems start?
Half of the complaints with a recorded mileage happened before about 50,000 miles, and 9% before 25,000 miles.
Is it dangerous?
Owners linked 2 crashes, 0 fires and 0 injuries to body & structure problems on this model year. If you notice symptoms, have the car checked before driving further.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) — owner complaints through October 20, 2026, recalls and defect investigations; fuel economy from the EPA. Complaints are unverified reports and are not proof of a defect. How we rate model years.