Which parts fail
Components named in complaints (doors, hood, frame, rust, paint and trim).
Mileage when the problem started
Owner reports
Selected complaints filed with NHTSA by 2007 Dodge Caliber owners, lightly cleaned up (personal details are redacted by NHTSA).
The contact owns a 2007 Dodge Caliber. The contact stated while pulling into a parking space, there was an abnormal sound coming from the rear of the vehicle. The contact stated that upon inspecting the vehicle, he noticed that the subframe was severely rusted and there was a piece of metal hanging down in the rear of the vehicle. An independent mechanic inspected the vehicle and determined that the subframe needed to be replaced. The mechanic informed the contact that the vehicle was undrivable. The vehicle was not repaired. The dealer was not notified of the failure. The manufacturer was notified of the failure, but no assistance was provided. The failure mileage was approximately 175,000. The VIN was not available.
The contact owns a 2007 Dodge Caliber. The contact stated that while it was raining, there was water entering through the sunroof and doors into the vehicle. The air bag warning light was illuminated. The contact called the local dealer, who stated that there were no related recalls for the failures. The vehicle was not diagnosed or repaired. The manufacturer was contacted and stated that there was no recall coverage for the failures and the contact was referred to the NHTSA Hotline to report the failures. The failure mileage was approximately 70,000.
I was informed on 09/29/2025 by my Chrysler dealer that a second critical component of my 2007 Caliber frame had rusted to the point that it broke. The first critical component was reported in my complaint tracking number 11459461 submitted on 04/03/2022. The component in that filing was the engine pan that supported the engine. On this latest failure, I was told the same thing by the shop manager: "If you hit a bump while driving this vehicle you could lose your back wheels". In the first incident, the engine could have fallen out of my vehicle. He was not going to let me drive it home. Then he changed his mind and told me it was "at my discretion". I did drive it home (4.5 miles) with no problem. He told me he was going to try and find a new or used part to fix the issue. He made it clear that he was not hopeful of finding one. …
This is a follow up to complaint #11459461 filed on 4/3/22 at 9:16:43am. I was not able to send documents at that time. Documents included relate to follow up on complaint #11591104. First pdf file: pages 1-4 Service bulletin from Chrysler - my model year not included; pages 5-7 service invoice and picture of missing engine cradle pan; page 8 original repair invoice; page 9 copy of original repair invoice with notations for Magna plant manager; page 10 notice of having received complaint; page 11 Defective lug nut issue; page 12 Complaint #11591104; page 13 Service invoice noting replacement of two defective lug nuts. Second pdf file: pages 1-2 Copy of original complaint #11459461; page 3 Copy of towing receipt due to defective lug nut. Third pdf file: Picture of three of four defective lug nut covers that I had to remove due to flat tires. …
Car has been garage kept entire time of owning. Sub Frame still rotted out causing so much damage to the car, the struts, the tire(s); etc, causing car to shake and tire to bow out. Car has been at a repair shop for over 7 months now trying to get a replacement part to repair it with no luck as of yet. This should NOT be the responsibility of the customer. This has been a known issue for many of these vehicles for years now with nothings done or any warnings sent out regarding this issue being a possible hazard.
Vehicle has less than 100,000 miles (strictly highway miles) and rear sub frame has completely rusted through causing back alignment to be drastically out, and fish tailing, which also causes hazardous steering control on dry and especially wet roads. Rapid wear and replacement of tires on rear end. I have researched and found this to be a consistent problem on multiple sites and forums.
I had brought my 2003 Stratus and 2007 Caliber in to the dealership for their 3000 mile oil change and check-up. When the Stratus was done, I switched it out with the Caliber. The receptionist came into the waiting room to inform me that my vehicle was dangerous to drive. The engine cradle had rotted out. The manager had asked her to tell me: "If you hit a big bump, your engine could fall out." She showed me a picture of the area in question. I asked what I was supposed to be looking for and was shown where the cradle was supposed to be. A post-it note was on the picture saying that the manager "will do some pricing". The invoice states: "We question the structural integrity of it being able to hold up much longer." When I did not hear anything for a few weeks, I called in and was told that it had not been done but the manager would get right on it. …
The window regulators of this car (& other vehicles of the same model) is a poor product of productivity. The cable wires that hold the window to guide the window up & down are known to & have become tangled up around the component that is said to properly wrap up the guided cable wires in the correct placement for the windows to continue to be able to roll up & down as intended. It's not just one door, it is literally every single door in this vehicle that has this issue. When I decided to try & save a little bit of money & get some used window regulators, I go to a salvage yard that had another dodge caliber (different model, how ever, same window regulators) just to find upon inspection, that every single door has a spoon in between the window & the rubber guard piece. Took the door panel off to further inspect & that vehicle had the same issue I have at this very moment... …
Tl* the contact owns a 2007 Dodge Caliber. While driving 40 MPH, the subframe fractured on the vehicle. In addition, the contact replaced the tires on three occasions and the rear wheel bearings were replaced three times. Furthermore, the ignition switch caught fire. The contact extinguished the fire. The vehicle was towed and repaired by a dealer and an independent mechanic. The manufacturer was not made aware of the issue. The failure mileage was 162,000.
My husband was driving and I was the passenger. 12/23/15. The car was a 2007 Dodge Caliber. Approx 80,000 miles on it. No prior accidents. A car turned into driver side. My husband was not hurt. Both cars going approx 10 miles an hour. I was hit with air bag. I received a broken rib, new bridge completely knocked out(or should I say in.). My back, neck, ankle still give me a lot of pain today. My body bruised head to toe. Concussion.
Body complaints in other Caliber years
Frequently asked questions
How common are body problems on the 2007 Dodge Caliber?
NHTSA has 170 complaints about the body & structure of the 2007 Dodge Caliber, 18% of the model year's 958 complaints. The component named most often is body (109 mentions).
Is there a recall for 2007 Dodge Caliber body problems?
No. NHTSA lists no body & structure recall for the 2007 Dodge Caliber, though it has 4 recalls for other components. If the problem is widespread, a repair may still be covered by an extended warranty or a manufacturer service bulletin — ask a dealer.
At what mileage do 2007 Dodge Caliber body problems start?
Half of the complaints with a recorded mileage happened before about 106,000 miles, and 5% before 25,000 miles.
Is it dangerous?
Owners linked 4 crashes, 2 fires and 5 injuries to body & structure problems on this model year. If you notice symptoms, have the car checked before driving further.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) — owner complaints through October 20, 2026, recalls and defect investigations; fuel economy from the EPA. Complaints are unverified reports and are not proof of a defect. How we rate model years.