Mileage when the problem started
Owner reports
Selected complaints filed with NHTSA by 2016 GMC Yukon owners, lightly cleaned up (personal details are redacted by NHTSA).
The contact owns a 2016 GMC Yukon. The contact stated that while driving at approximately 70 mph, the brake pedal was hard to depress and the brake pedal traveled to the floorboard. The contact mentioned that the brake pedal needed to be pumped in order for the vehicle to be operated. In addition, the contact stated the vehicle failed to stop immediately. The vehicle was taken to a dealer where it was diagnosed that the brake line needed to be flushed. The vehicle was repaired however, the failure persisted. The vehicle was taken to an independent mechanic where the failure was undetermined. The contact mentioned while the mechanic was reversing the vehicle the brakes failed to operate causing the vehicle to crash into a person and a vehicle. The contact stated that the lady sustained multiple injuries that needed medical attention. A police report was filed. …
The contact owns a 2016 GMC Yukon. The contact stated that while driving at an undisclosed speed, the brake pedal was depressed; however, the vehicle failed to stop as intended. The contact stated that there was an abnormal sound coming from the vehicle and the ABS warning light was illuminated. The contact stated that after several attempts, the vehicle stopped. The vehicle was taken to the dealer; however, the vehicle was waiting to be inspected. The contact stated that an unknown recall repair with a similar description was completed in 2024; however, the contact was informed that the repair was not covered under warranty. The manufacturer was made aware of the failure but provided no assistance. The failure mileage was approximately 136,000.
The contact owns a 2016 GMC Yukon. The contact stated that while driving at an undisclosed speed, the brake pedal became inoperable and failed to engage properly, with no warning lights illuminated. The contact also stated that while the vehicle was parked, excessive force was needed to engage the brake pedal and stop the vehicle. The contact stated that the failure nearly caused the vehicle to collide with another object. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 108,959.
In my experience of transmission failure with my 16' GMC YUKON, there was no warning. I had not experienced any issues with the slipping or jerking feel when accelerating or braking as described in the class action law suit. My vehicle had 105k miles, I took it in for regular maintenance including having the transmission flushed as I was told to do so for preventative maintenance. The transmission failed when I was traveling on the interstate with my family and I came upon some traffic so I applied the brake and the whole vehicle bucked and jerked as it shifted into down gear. I was traveling at 30-35 mph in the traffic and the whole time I felt a slipping motion in the car. I made it to a gas station, refueled, and tried to restart my journey. …
On two occasions while driving at low speed, my vehicle braked on its on a pulled hard to the left; the stabilitrac indicator also popped on briefly. I went online to determine if there were any recalls on my vehicle and found that one of the recalls on the 2016 Yukon was the exact issue happening with my vehicle. I checked my VIN and found that my vehicle was not one of the vehicles with this issue. I called GM to see if my vehicle had just not been published yet. I explain the situation too the customer service person; she understood my situation and informed me that until my specific VIN in identified with this issue, there's nothing that can be done. I'm thinking that until an accident happen because of this issue, there is nothing that can be done. I read that my issue was a problem with the EBCM, which needs to be reprogrammed. I thank you for any assistance with this issue.
i HAVE A SERVICE SUSPENSION LIGHT THAT CONTINUES TO POP UP ON DASHBOARD THE MOST IMPORTANT ISSUE THAT NEEDS TO BE ADDRESSED IS THE BRAKE LIGHTS. I have previously had the passenger side brake light stop working. In order to repair this you have to order a whole new taillight. My vehicle was approximatly 6 years old when this started happening. First incident (2022 with approximately 65000 miles) Yesterday, I was pulled over by a policeman and both of my brake lights are not working. We found a way to sauder (I know this is incorrect spelling) the broken metal piece back together in the taillight; however, this is not the correct way to fix the underlying problem and clearly it is only a temporary fix because the passenger side broke again in a new spot.
2016 GMC Yukon. I received a letter that stated my Yukon may have a condition where the brake lights intermittently do not illuminate. In March 2020 the drivers side rear brake light did not illuminate. I brought it to a Chev/GMC dealer that replaced the tail light no charge. Now my passenger rear tail brake light does not illuminate. My Yukon has 68800 miles on it and it is going on 6 years old. I still have my letter I received about this issue. Without my tail/brake light it is unsafe to drive my vehicle until I get that brake unit replaced. Will I still be able to my passenger side brake unit replaced at no charge? I haven't been able to get it replaced due to I had total knee replacement surgery in February 2022
My brakes are not working properly. I can be backing up and put my foot on the brake. My truck will keep moving until I apply a lot of pressure on the brake pedal. I can be backing up and my truck will automatically brake and stop moving. I have to cut the truck off, start it back up for it to move. I was in a stand still traffic jam and braking a lot and my truck did stop it keep rolling. Sometimes when I apply the brake it slides.. This is the third time I have put it in the shop. I changed the brakes, brake sensor and replaced tires. I am scared to drive it. My truck is currently in the shop now for the brakes. please help.
The trailer break service light is coming on. There is not a way to dismiss the sound and comes on every few seconds, it's very distracting a HUGE safety risk. I have contacted GMC Valencia California and they have have several vehicles with the same issue / hazard. This has apparently been going on for years yet GMC refuses to put a recall on the vehicles nor take action on correcting this on this critical issue. This is very upsetting and with all the complaints / concerns it appears nobody cares for the lives this defective issue could cause, especially when towing. Thank you.
Rear driver taillight assembly does not work all the time! One day it works the next day it does not! I had to have the passenger side replaced about 6-8 months ago & it was replaced by the dealer at that time & there was no cost to me as it was under warranty at that time! I think there may be an issue with the LED bulbs! Now the problem is with the drivers side! This is a safety problem and a recall should be issued!!!!It is no longer under warranty & out of pocket cost may be $600 to $1000!
Related recalls
Service brakes
General Motors LLC (GM) is recalling certain 2015-2020 Chevrolet Suburban, Tahoe, and GMC Yukon, and 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 vehicles equipped with a 5.3-liter engine, a 3.08-ratio rear axle and four-wheel drive.
Remedy: GM will notify owners, and dealers will reprogram the EBCM, free of charge. The recall began December 11, 2019. Owners may contact Chevrolet customer service at 1-800-630-2438 or GMC customer service at 1-800-462-8782.
Service brakes, hydraulic › Power assist › Vacuum
General Motors LLC (GM) is recalling certain 2015-2017 Cadillac Escalade, 2014-2018 Chevrolet Silverado, GMC Sierra, 2015-2018 Chevrolet Suburban, Tahoe, GMC Yukon vehicles. The amount of vacuum created by the vacuum pump may decrease over time.
Remedy: GM will notify owners, and dealers will reprogram the Electronic Brake Control Module, free of charge. The recall began October 8, 2019.
NHTSA investigations
Brake Vacuum Pump Failure
On November 20, 2018, the Office of Defects Investigations (ODI) opened PE18-012 to investigate instances of sudden onset of a hard brake pedal that could result in extended stopping distance due to an issue with the brake assist vacuum pump in model year (MY) 2014 through 2016 GMC Sierra 1500 and Chevrolet Silverado 1500 series pickup trucks and MY 2015 through 2016 Cadillac Escalade, Chevrolet Suburban, Chevrolet…
Brake complaints in other Yukon years
Frequently asked questions
How common are brake problems on the 2016 GMC Yukon?
NHTSA has 56 complaints about the brakes of the 2016 GMC Yukon, 19% of the model year's 288 complaints.
Is there a recall for 2016 GMC Yukon brake problems?
Yes — NHTSA recall 19V-761 (service brakes, Oct 24, 2019); NHTSA recall 19V-645 (vacuum, Sep 6, 2019). Recall repairs are free at authorized dealers.
At what mileage do 2016 GMC Yukon brake problems start?
Half of the complaints with a recorded mileage happened before about 53,000 miles, and 8% before 25,000 miles.
Is it dangerous?
Owners linked 2 crashes, 0 fires and 1 injury to brakes problems on this model year. If you notice symptoms, have the car checked before driving further.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) — owner complaints through October 20, 2026, recalls and defect investigations; fuel economy from the EPA. Complaints are unverified reports and are not proof of a defect. How we rate model years.