Ford Taurus Collision Avoidance Problems

Collision Avoidance complaints by model year

Which parts fail

• Sensing system › Camera
  15
• Warnings
  10
• Rearview system braking
  9
• Blind spot detection
  7
• Automatic emergency braking
  2
• Adaptive cruise control
  2
• Camera system
  2
• Assist
  1

Components named in complaints (automatic emergency braking, adaptive cruise, lane keeping, backup camera).

Mileage when the problem started

• Under 25k
  22%
• 25k–50k
  1215%
• 50k–75k
  2328%
• 75k–100k
  1518%
• 100k–150k
  2429%
• 150k+
  67%

What owners report

The contact owns a 2019 Ford Taurus. The contact stated that the camera was blank, causing the contact to reverse into a pole in a parking lot. The contact stated that the trunk was bent and there was a hole in the bumper. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The local dealer was contacted and confirmed that the failure was associated with the recall. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was 113,323.

The contact owns a 2019 Ford Taurus. The contact stated that while driving at an undisclosed speed, the vehicle made an abnormally loud sound. Additionally, the message "Key Not Detected" was displayed while the fob key was inside the vehicle, and the rearview camera displayed a blank image while reversing. The contact stated that the dealer had previously replaced the manifold, but the failure persisted. The vehicle was taken back to the dealer, who determined that the manifold needed to be replaced for a second time, and an unknown module software update was needed. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 69,000.

The contact owns a 2018 Ford Taurus. The contact stated that while reversing, the rear-view camera display failed to function as intended. The contact stated that the image appeared and then disappeared. The message that the rear-view camera was unavailable was displayed. Occasionally, the rear-view camera displayed a distorted image, and the failure was intermittent. The dealer was made aware of the failure. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact was informed that parts were not available. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The manufacturer was not made aware of the failure. The failure mileage was approximately 135,000.

The contact owns a 2018 Ford Taurus. The contact stated that while entering the vehicle, the passenger's side B-pillar trim had detached. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention) and 25V611000 (Structure). The vehicle was taken to the local dealer, but the vehicle was not diagnosed or repaired. An appointment was scheduled by the manufacturer to another local dealer, Gengras Ford Service (225 New Britain Ave, Plainville, CT 06062), where the dealer requested to keep the vehicle overnight to inspect, but the vehicle was not diagnosed or repaired. The dealer declined to provide a loaner vehicle. The manufacturer was contacted and opened a ticket. The approximate failure mileage was 50,000.

The contact owns a 2016 Ford Taurus. The contact received notifications of NHTSA Campaign Numbers: 25V611000 (Structure) and 25V695000 (Back Over Prevention); however, the parts to do the recall repairs were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact stated that when the vehicle was shifted into reverse(R), the back over prevention screen turned off. The vehicle was taken to a dealer, and it was confirmed that the parts for the recall repairs were not yet available. The vehicle was not repaired. Additionally, the contact stated that after visiting the car wash on several occasions, and the vehicle was parked, the contact became aware that the passenger's and driver's door trims had detached. …

The contact owns a 2016 Ford Taurus. The contact stated that the passenger's side door exterior B-Pillar trim was detaching. Additionally, while in reverse(R), the rearview camera displayed a blue image or the message "Camera Unavailable" was displayed on the screen. The contact stated that the failure was intermittent. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention) and became aware that the VIN was also included in NHTSA Campaign Number: 25V611000 (Structure); however, the parts to do the recall repairs were not yet available. The dealer was not contacted. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. The manufacturer was not made aware of the failures. The failure mileage was approximately 130,000.

The contact owns a 2015 Ford Taurus. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that while reversing, the rearview camera displayed an upside-down and unclear image, causing the vehicle to bump into another vehicle on one occasion. No injuries or damages were reported. Several dealers were contacted about the failure and informed that parts were unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure, and a case was filed. The vehicle had yet to be repaired. The failure mileage was approximately 90,000.

The contact owns a 2015 Ford Taurus. The contact stated that while reversing, the rear-view camera went blank, and the vehicle crashed into a fence. The contact stated that the trunk was dented, and the rear-view camera was damaged. The dealer was made aware of the failure, and the contact was informed that parts were unavailable. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact stated that the failure was a persistent failure. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The manufacturer was not made aware of the failure. The failure mileage was approximately 120,000.

Related recalls (1)