2016 Chrysler 200 Electrical Problems

Which parts fail

• 12V/24V/48V battery
  2
• Wiring
  1

Components named in complaints (battery, alternator, wiring, ignition, instrument cluster, infotainment).

Mileage when the problem started

• Under 25k
  1723%
• 25k–50k
  2332%
• 50k–75k
  2433%
• 75k–100k
  57%
• 100k–150k
  23%
• 150k+
  23%

Owner reports

Selected complaints filed with NHTSA by 2016 Chrysler 200 owners, lightly cleaned up (personal details are redacted by NHTSA).

The contact owns a 2016 Chrysler 200. The contact stated while driving approximately 35 MPH, the instrument cluster flickered, and the vehicle stalled. The contact was able to restart the vehicle. The contact stated that the failure was intermittent and occurred at various speeds. The contact had taken the vehicle to an independent mechanic who was unable to duplicate the failure. The vehicle was not repaired. The failure reoccurred and the vehicle was no longer drivable. The contact had not taken the vehicle to a dealer or an independent mechanic. The vehicle was not diagnosed or repaired. The contact researched online and related the failure to NHTSA Campaign Number: 15V470000 (Electrical System). The manufacturer was not informed of the failure. The failure mileage was approximately 90,000.

I believe the brake or something related to the brakes failed. I ran a stop sign, with no evidence of brake marks on the road. I crossed over a highway hit a side walk almost hit a house. The safety of myself and others was at extreme danger. When finally came to a stop I couldn't put my car in Park, or back in drive or shut my car off, i beleive i had no braking or something electrical failed. My car is totaled. The only light on was the airbag light before the accident.

The contact owns a 2016 Chrysler 200. The contact stated that while depressing the brake pedal to start the vehicle, the pedal was hard to depress. Additionally, while driving the vehicle would suddenly stall without warning. The failure had occurred on multiple occasions. The cause of the failure was not yet determined. The local dealer was notified of the failure. The manufacturer was not yet contacted. The failure mileage was 73,000.

Electrical system under the seats smoked and went out for the air bags. Cost me $2,200 dollars out of pocket. I am on Social Security. Can't afford such dept. Brakes are sluggish and can't be trusted to stop quickly. Power Train ,Electrical System,Engine not safe. Electrical system, Service Brakes, Forward Collision Avoidance System needs to be looked at and replace if needed.

My car gave me a service airbag message when I started it on July 31st. I already had an appointment scheduled with a Chrysler dealer to resolve an unrelated recall issue, so I asked them to look into what was causing the airbag issue, as well. They told me that the jumper wiring needed to be replaced on both sides of the vehicle in order to resolve diagnostic code B0020-13. They quoted me over $2,800.00 to fix the issue and told me that my airbags would not go off if I were to get in an accident unless the repairs were made. I am unable to afford this, so I contacted FHA customer service to seek cost assistance, but was told my car is too far out of warranty. My car only has 78,000 miles, so I should not have any safety issues with it. I was told by the technician that this is a common problem with my vehicle. …

Vehicle has 46,000 miles on odometer. A year ago the "Service Airbag System" light would intermittently illuminate. It is now staying lit all the time. I was speaking with an acquaintance as they had the same vehicle. Theirs caught on fire under the seat in the electrical connection box for the airbag. I took it to a few of our local mechanics and they say it is a substantial safety issue as they pulled the codes B0028-13 and B0020-13. Right side and left side seat deployment squib circuit open. The airbags will not deploy upon impact. The consensus from the mechanics was that Chrysler has known this is a common problem in these vehicles and needs to address the repair. After calling Chrysler and finding out they do know this is a problem in design it will still cost $4000.00 to repair as it's not covered under warranty. …

I took my car to Carman Dodge Chrylser Dealer located 196 s Dupont hwy , new castle de, 19720. My car was scheduled for a recall repair u90 and power train software update. I took my car in 4-10-25 and it stayed overnight until 4-11-25. When receiving my car I was presented with new issues that caused a no bus code and radio died. My car had no internal issues prior to taking my car to the dealer for recall repairs. I have all the documentation and employees names for the service department. I was told by my advisor Lance Grey and supervisor Joseph Troboletti that there is nothing else they can do. Other than these new problems that occurred just so happened to be coincidental. And in order to get things replace I would have to wait until July and I may be eligible for a small discount on the parts. …

3 ongoing problems. 1. Our car dies while driving. This is Dangerous. Tonight is the 3rd (maybe 4th) time in about a year or year and a half or so. The first two times modesto jeep dodge chrysler determined it was too low on oil (but the mileage was much less than when oil change was due according to my oil change sticker. Also very dangerous because there is never an oil light that comes on the dashboard to warn oil low. About 3 months ago it died 500 miles before oil change supposed to be due. Tonight it died again with no warning. Oil change is not supposed to be due for another 1000 miles. Very scary. No warning light. 2. After I'm stopped at a stop sign or light then during acceleration car jerks. 3. I've had this car about 3 years. The airbag light came on shortly after I owned the car. Never been in an accident in this car.

While driving, my 2016 Chrysler 200 (3.6L V6) experienced a sudden and complete electrical failure. All systems shut down simultaneously, including the dashboard, engine, power steering assist, and electrical accessories. The vehicle coasted to a stop and would not restart-no crank, no dash lights, no response. After allowing the vehicle to cool for approximately 30-45 minutes, electrical power returned and the vehicle restarted normally. This failure mode is identical to the Power Distribution Center (PDC) connector defect that resulted in a recall for the 2015 Chrysler 200. My vehicle is the same platform with the same component architecture, yet no recall exists for the 2016 model year. This is a serious safety defect that creates a risk of crash, loss of steering assist, and loss of vehicle control while driving.

About 2 weeks ago , my car began malfunctioning and randomly shutting off while driving. The car gives no indication that there is an issue before hand which is dangerous. It has happened to me while entering the freeway and while on regular streets. In addition, when this happens, my gearshift somehow gets stuck which makes me unable to move the car. Sometimes I cannot turn the car off, it would get stuck running. The shift would malfunction illuminating other shifts even though it is stuck. This issue has happened to me again in the wee hours of this morning at 3am on a dark road. I feared for me life... I see that this is an ongoing issue in many complaints that I see but there has been no resolve from the manufacturer. Please help.

Related recalls

Electrical complaints in other 200 years