Which parts fail
Components named in complaints (struts, shocks, control arms, ball joints, springs).
Mileage when the problem started
Owner reports
Selected complaints filed with NHTSA by 2007 Jeep Liberty owners, lightly cleaned up (personal details are redacted by NHTSA).
The contact owns a 2007 Jeep Liberty. The contact stated that while driving at an undisclosed speed, the contact heard an abnormal sound coming from the rear upper control arm. The vehicle was taken to an independent mechanic where it was diagnosed with corrosion on both sides and the rear control arms. The contact was informed that the rear control arms needed to be replaced. The vehicle was repaired. The contact stated that the failure had been persistent, and failure had occurred three times. The manufacturer was made aware of the failure but provided no assistance. The failure mileage was approximately 125,000.
The contact owns a 2007 Jeep Liberty. The contact stated while driving approximately 40-50 MPH, the vehicle vibrated, and the contact heard an abnormal sound coming from underneath the vehicle. The contact stated that several unknown warning lights were illuminated. The vehicle was not taken to an independent mechanic or dealer. The vehicle was not diagnosed or repaired by an independent mechanic or the dealer. The contact stated that the failure was persistent. The manufacturer was not made aware of the failure. The failure mileage was approximately 166,270.
The contact owns a 2007 Jeep Liberty. The contact stated while driving 20 MPH and making a turn, the passenger's side of the vehicle inadvertently lowered onto the wheels. The vehicle was towed to an independent mechanic, where it was diagnosed that the passenger's side ball joint had fractured due to corrosion. The vehicle was repaired. An unknown dealer was notified of the failure. The manufacturer was notified of the failure but not assistance because the vehicle was not covered under Warranty. The failure mileage was approximately 153,000.
The contact owns a 2007 Jeep Liberty. The contact stated while driving at an undisclosed speed, the front passenger's side tire inadvertently detached. There was no warning light illuminated. The vehicle was inspected by a friend who is an independent mechanic and determined that the upper and lower ball joints failed and needed to be replaced. The vehicle was not repaired. Neither the dealer nor the manufacturer was notified of the failure. The failure mileage was approximately 164,000.
The contact owns a 2007 Jeep Liberty. The contact stated while driving 50 mph, there was an abnormal sound coming from the rear of the vehicle while depressing the brake pedal. The contact stated that there was no warning light illuminated. The vehicle was diagnosed but not repaired. Upon investigation, the contact associated the failure with NHTSA Campaign Number: 18V278000 (Suspension). The manufacturer was not informed of the failure. The failure mileage was approximately 230,000.
The contact owns a 2007 Jeep Liberty. The contact noticed that the front control arm and front subframe were rusted. The vehicle was taken to the dealer and it was confirmed that the full front suspension needed to be replaced. The vehicle was repaired. The contact mentioned that after leaving the dealer, the front control arm fractured. The vehicle was towed back to the contact's residence. The manufacturer was notified of the failure. The approximate failure mileage was 80,000.
Subject: Inquiry Regarding Ball Joint and Control Arm Issues on My 2007 Jeep Liberty Dear support tech, I am writing to express my concerns regarding recurring issues with my 2007 Jeep Liberty, specifically with the driver-side ball joint and control arm. In 2019, I had the driver-side ball joint replaced at Firestone. However, on [redacted], I experienced a serious issue when the wheel became stuck while reversing out of a parking space. Fortunately, it occurred at low speed, and the vehicle was towed through my insurance. A family member was able to fix it temporarily. More recently, on February 25, 2025, I had new wheels installed at Firestone, where I was informed that there is an issue with both the front control arm and the left and right ball joints. Given that I don't drive at high speeds and use the vehicle less frequently now, this seems unusual and concerning. …
The contact owns a 2007 Jeep Liberty. The contact stated that she initially received a recall notification for NHTSA Campaign Number: 18V278000 (Suspension) and had the recall serviced at a dealer. Recently, the contact stated that an abnormal clanking sound was coming from the vehicle while driving at various speeds. There was no warning light illuminated. The contact had first taken the vehicle to an independent mechanic where she had the brake pads, rotors and calipers replaced. Despite the repair, the failure persisted, and the contact then took the vehicle back to the dealer where the recall was serviced. The dealer then informed her that both the lower and upper control arms had fractured and that the driveshaft and ball joints all needed to be replaced. The manufacturer was not notified of the failure. The vehicle was not repaired. The failure mileage was unknown.
The contact owns a 2007 Jeep Liberty. The contact received notification of NHTSA campaign number: 18V278000 (Suspension) however, the part to do the recall repair was unavailable. The contact called the local dealer and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
Pulling away from getting gas I heard and felt a loud bang. Could not turn my wheel much. Something was scraping the ground. I got out and saw my lower ball on the driver's front broke off slightly pulling my cv joint. Sat for hours until I got a tow back home. I'm lucky I wasn't on the highway, I could have died. Doesn't show a recall but I just purchased this car. Have had nothing but issues.
Related recalls
Suspension › Rear
Chrysler (FCA US LLC) is recalling certain 2004-2007 Jeep Liberty vehicles. The rear suspension lower control arms can fracture due to excessive corrosion, causing a loss of vehicle control.
Remedy: Chrysler will notify owners, and dealers will replace the rear lower control arms, free of charge. The recall began June 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403.
Suspension › Rear
In June 2012, Chrysler expanded this recall to include model year 2006 and 2007 Jeep liberty vehicles, representing an additional 137,176 vehicles. This recall now concerns certain my 2004-2007 Jeep liberty vehicles. The total number vehicles being recalled is now 346,900.
Remedy: Chrysler will notify owners, and dealers will replace the rear lower control arms on all affected vehicles originally sold in, or currently registered in, connecticut, delaware, illinois, indiana, iowa, maine, maryland,…
Suspension complaints in other Liberty years
Frequently asked questions
How common are suspension problems on the 2007 Jeep Liberty?
NHTSA has 79 complaints about the suspension of the 2007 Jeep Liberty, 11% of the model year's 703 complaints. The component named most often is front › control arm › lower ball joint (5 mentions).
Is there a recall for 2007 Jeep Liberty suspension problems?
Yes — NHTSA recall 18V-278 (rear, May 1, 2018); NHTSA recall 12V-085 (rear, Mar 5, 2012). Recall repairs are free at authorized dealers.
At what mileage do 2007 Jeep Liberty suspension problems start?
Half of the complaints with a recorded mileage happened before about 108,000 miles, and 6% before 25,000 miles.
Is it dangerous?
Owners linked 6 crashes, 0 fires and 0 injuries to suspension problems on this model year. If you notice symptoms, have the car checked before driving further.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) — owner complaints through October 20, 2026, recalls and defect investigations; fuel economy from the EPA. Complaints are unverified reports and are not proof of a defect. How we rate model years.